Giriş
This is a prerequisite guide! This guide is part of another procedure and is not meant to be used alone.
Single step for removing the bushing nuts. Needed for a few other guides.
Neye ihtiyacın var
-
-
Carefully tilt the generator to its side or back.
-
Use a 10 mm socket to remove the two nuts securing the front bushing mounts to the bottom of the generator.
-
Carefully tilt the generator back to an upright position.
-
-
Neredeyse bitti!
To reassemble your device, follow these instructions in reverse order.
Sonuç
To reassemble your device, follow these instructions in reverse order.
