Eşyalarını Tamir Et Topluluk Mağaza

Honda CSC29 Brushes Replacement

Giriş

In order to access the brush assembly, the front cover of the alternator will need to removed first. The brushes play an important in role in transferring voltage from the rotor to the rest of the alternator.

Neye ihtiyacın var

  1. Honda CSC29 Brushes Replacement, Alternator Front Cover: adım 1, 3 resimden 1. Honda CSC29 Brushes Replacement, Alternator Front Cover: adım 1, 3 resimden 2. Honda CSC29 Brushes Replacement, Alternator Front Cover: adım 1, 3 resimden 3.

    • Remove 4, 7.9mm nuts using a 7.9mm socket driver head

    • One of the nuts is placed underneath the L-Bracket. Remove the L-Bracket and the 3 circled nuts before attempting to remove the remaining nut

    • There are two covers that need to be removed from the alternator. This step describes how to remove the back cover.

    Düzenle

  2. Honda CSC29 Brushes Replacement: adım 2, 3 resimden 1. Honda CSC29 Brushes Replacement: adım 2, 3 resimden 2. Honda CSC29 Brushes Replacement: adım 2, 3 resimden 3.

    • Pull cover off the body of the alternator

    • Once you have done this, you should be able to see the internal components of the alternator, particularly the bridge assembly that houses the rectifier, voltage regulator and brushes.

    Düzenle

  4. Honda CSC29 Brushes Replacement, Brushes: adım 3, 3 resimden 1. Honda CSC29 Brushes Replacement, Brushes: adım 3, 3 resimden 2. Honda CSC29 Brushes Replacement, Brushes: adım 3, 3 resimden 3.

    • You should now be able to see the recifier assembly, the brushes are located in the middle of the recifier assembly.

    • Remove the brush assembly by unscrewing 2, 6mm center screws using a #2 Phillips head screw driver

    Düzenle

  5. Honda CSC29 Brushes Replacement: adım 4, 3 resimden 1. Honda CSC29 Brushes Replacement: adım 4, 3 resimden 2. Honda CSC29 Brushes Replacement: adım 4, 3 resimden 3.

    • Remove the brush assembly by pulling it out.

    Düzenle

  6. Honda CSC29 Brushes Replacement: adım 5, 1 resimden 1.

    • Inspect the brushes. If they are scored and not smooth you will need to replace the entire assembly.

    • When reinserting the brushes, make sure the springs keep the brushes in contact with the stator.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

2 farklı kişi bu kılavuzu tamamladı.

Yazar

4 tane daha katılımcı ile

Raymond Akagi

Üyelik tarihi: 04/11/16

214 İtibar

1 Kılavuz yazıldı

Rozetler: 9

+6 tane daha rozet

Ekip

Cal Poly, Team 25-1, Maness Spring 2016 Cal Poly, Team 25-1, Maness Spring 2016 üyesi

CPSU-MANESS-S16S25G1

4 Üyeler

15 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 3

Son 7 gün: 11

Son 30 gün: 49

Her zaman: 1,155