Eşyalarını Tamir Et Topluluk Mağaza

Honeytone N-10 Mini Amp Speaker Replacement

Giriş

Some soldering will be required in order to complete the speaker replacement.

Neye ihtiyacın var

  1. Honeytone N-10 Mini Amp Speaker Replacement, Speaker: adım 1, 2 resimden 1. Honeytone N-10 Mini Amp Speaker Replacement, Speaker: adım 1, 2 resimden 2.

    • Flip your amp over to begin removing the plastic cover.

    Düzenle

  2. Honeytone N-10 Mini Amp Speaker Replacement: adım 2, 2 resimden 1. Honeytone N-10 Mini Amp Speaker Replacement: adım 2, 2 resimden 2.

    • Remove the battery cover and take the battery out.

    • Unless you want a quick pick-me-up, in which case feel free to leave it in and get shocked.

    Düzenle

  3. Honeytone N-10 Mini Amp Speaker Replacement: adım 3, 2 resimden 1. Honeytone N-10 Mini Amp Speaker Replacement: adım 3, 2 resimden 2.

    • Unscrew the four corner screws using a phillips #0 screw driver to remove the back cover.

    • While the screws are recessed deep into the cover and difficult to see, 2-4 turns will easily release them.

    Düzenle

  4. Honeytone N-10 Mini Amp Speaker Replacement: adım 4, 3 resimden 1. Honeytone N-10 Mini Amp Speaker Replacement: adım 4, 3 resimden 2. Honeytone N-10 Mini Amp Speaker Replacement: adım 4, 3 resimden 3.

    • Remove the back cover by carefully pushing the battery connector through the hole in the cover.

    Düzenle

  6. Honeytone N-10 Mini Amp Speaker Replacement: adım 5, 3 resimden 1. Honeytone N-10 Mini Amp Speaker Replacement: adım 5, 3 resimden 2. Honeytone N-10 Mini Amp Speaker Replacement: adım 5, 3 resimden 3.

    • With the phillips #0 screwdriver, unscrew the two white plastic clips that hold the speaker in place.

    Düzenle

  7. Honeytone N-10 Mini Amp Speaker Replacement: adım 6, 2 resimden 1. Honeytone N-10 Mini Amp Speaker Replacement: adım 6, 2 resimden 2.

    • Use flush wire cutters to remove black and red wires from the old speaker.

    • Note: The black wire has already been removed in this example image.

    Düzenle

  8. Honeytone N-10 Mini Amp Speaker Replacement: adım 7, 3 resimden 1. Honeytone N-10 Mini Amp Speaker Replacement: adım 7, 3 resimden 2. Honeytone N-10 Mini Amp Speaker Replacement: adım 7, 3 resimden 3.

    • Connect the new speaker by soldering the black and red wires to the negative and positive connections respectively

    Düzenle

  9. Honeytone N-10 Mini Amp Speaker Replacement: adım 8, 1 resimden 1.

    • Connect the battery and turn the power on to test proper connection of the new speaker.

    • Some static is fine, this is the natural sound of the amp.

    • Careful not to touch any of the metal components inside while temporarily testing the connection.

    Düzenle

  10. Honeytone N-10 Mini Amp Speaker Replacement: adım 9, 1 resimden 1.

    • Reverse steps 1-5 to complete repair.

    Düzenle

    • Connect the amp to your favorite instrument and test out the new sound!

    Düzenle
Bitiş Çizgisi

3 farklı kişi bu kılavuzu tamamladı.

Yazar

Corey Brown

Üyelik tarihi: 06/24/16

8.682 İtibar

11 adet Kılavuz yazıldı

Rozetler: 34

+31 tane daha rozet

Bir Yorum

Cool. If mine doesn’t work, is it likely to be the speaker? Thanks.

hupaand - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 3

Son 30 gün: 16

Her zaman: 3,489