Tehlike
Tehlikeli Olma Potansiyeli Var
Bu talimat doğru şekilde uygulanmazsa yaralanma meydana gelebilir. Dikkatli olun ve tüm uyarıları takip edin.
Tehlike

Giriş

This guide will walk you through the steps to remove your rotation motor. Though disassembly is simple, it is a difficult process to put back together because you have to solder wires or use a wire connector to reattach a new rotation motor.

Lay fan on the ground and use your fingers peel the three feet off the bottom of the fan.
  • Lay fan on the ground and use your fingers peel the three feet off the bottom of the fan.

Yorum Ekle

Remove the three 12mm screws using the Phillips #0 Screwdriver.
  • Remove the three 12mm screws using the Phillips #0 Screwdriver.

Yorum Ekle

  • Remove the two 10mm screws using the Phillips #0 Screwdriver.

Yorum Ekle

  • Move the rotation motor left and right to reveal the screw connecting it to the fan.

  • Remove the 18mm screw from the side of the motor using the Phillips #0 Screwdriver.

Yorum Ekle

  • Using the wire cutters, severe the wires connecting the rotation motor to the fan.

  • To put back together you will need to resolder or use wire connectors to reattach motor.

Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

Armando Jacob Espinoza

Üyelik tarihi: 14-10-2014

471 İtibar

3 adet Kılavuz yazıldı

Takım

Cal Poly, Team 10-40, Amido Fall 2014 Cal Poly, Team 10-40, Amido Fall 2014 üyesi

CPSU-AMIDO-F14S10G40

3 Üyeler

7 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 3

Son 7 Gün: 8

Son 30 Gün: 26

Her zaman: 1,583