Eşyalarını Tamir Et Topluluk Mağaza

Hoover Power Scrub FH50150 Nozzle Replacement

Giriş

Nozzle that releases the water/solution and sucks up dirty water. Also where the hose can be attached/detached. This nozzle may need to be cleaned after usage, so removal is necessary.

  1. Hoover Power Scrub FH50150 Nozzle Replacement, Water Tank: adım 1, 1 resimden 1.

    • Unlatch the grey switch labeled “Tank Release”.

    Düzenle

  2. Hoover Power Scrub FH50150 Nozzle Replacement: adım 2, 1 resimden 1.

    • Gently pull on the water tank until it releases from the base.

    Düzenle

  4. Hoover Power Scrub FH50150 Nozzle Replacement, Nozzle: adım 3, 1 resimden 1.

    • Lift the switch that was covered by removing the tank.

    Düzenle

  5. Hoover Power Scrub FH50150 Nozzle Replacement: adım 4, 1 resimden 1.

    • Pull the nozzle until out of place.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

4 tane daha katılımcı ile

Anthony Margulis

Üyelik tarihi: 01/22/18

85 İtibar

1 Kılavuz yazıldı

Rozetler: 2

Ekip

Cal Poly, Team S16-G4, Banghart Winter 2018 Cal Poly, Team S16-G4, Banghart Winter 2018 üyesi

CPSU-BANGHART-W18S16G4

5 Üyeler

10 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 7

Son 30 gün: 39

Her zaman: 785