Eşyalarını Tamir Et Topluluk Mağaza

Hoover T-Series WindTunnel Pet UH30310 Inlet Filter Replacement

Giriş

This guide will help you into replacing the inlet filter in the body of the vacuum.

Neye ihtiyacın var

  1. Hoover T-Series WindTunnel Pet UH30310 Inlet Filter Replacement, Inlet Filter: adım 1, 2 resimden 1. Hoover T-Series WindTunnel Pet UH30310 Inlet Filter Replacement, Inlet Filter: adım 1, 2 resimden 2.

    • Remove the frame of the vacuum by pinching the tab down and pulling the frame away from the vacuum body.

    Düzenle

  3. Hoover T-Series WindTunnel Pet UH30310 Inlet Filter Replacement: adım 2, 2 resimden 1. Hoover T-Series WindTunnel Pet UH30310 Inlet Filter Replacement: adım 2, 2 resimden 2.

    • Locate the large sieve at the bottom of the vacuum body.

    • Lift off the sieve, separating it from the filter.

    Düzenle

  4. Hoover T-Series WindTunnel Pet UH30310 Inlet Filter Replacement: adım 3, 1 resimden 1.

    • Remove the old inlet filter from the vacuum body and replace with the new filter.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

2 tane daha katılımcı ile

Nathan Yung

Üyelik tarihi: 01/18/18

241 İtibar

2 adet Kılavuz yazıldı

Rozetler: 3

Ekip

Cal Poly, Team S12-G4, Banghart Winter 2018 Cal Poly, Team S12-G4, Banghart Winter 2018 üyesi

CPSU-BANGHART-W18S12G4

5 Üyeler

9 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 4

Son 30 gün: 13

Her zaman: 359