Eşyalarını Tamir Et Topluluk Mağaza

Hoover T-Series WindTunnel Pet UH30310 Vacuum Belt Replacement

Giriş

This guide will help you remove the belt the drives the brush.

Neye ihtiyacın var

  1. Hoover T-Series WindTunnel Pet UH30310 Vacuum Belt Replacement, Brush: adım 1, 2 resimden 1. Hoover T-Series WindTunnel Pet UH30310 Vacuum Belt Replacement, Brush: adım 1, 2 resimden 2.

    • Place the vacuum on its back.

    • On the bottom right side, push the red lever to the left.

    • Remove the plastic cover.

    Düzenle

  2. Hoover T-Series WindTunnel Pet UH30310 Vacuum Belt Replacement: adım 2, 3 resimden 1. Hoover T-Series WindTunnel Pet UH30310 Vacuum Belt Replacement: adım 2, 3 resimden 2. Hoover T-Series WindTunnel Pet UH30310 Vacuum Belt Replacement: adım 2, 3 resimden 3.

    • Grab the red switch under the brush and push left.

    • Then remove the plastic base plate.

    Düzenle

  4. Hoover T-Series WindTunnel Pet UH30310 Vacuum Belt Replacement: adım 3, 3 resimden 1. Hoover T-Series WindTunnel Pet UH30310 Vacuum Belt Replacement: adım 3, 3 resimden 2. Hoover T-Series WindTunnel Pet UH30310 Vacuum Belt Replacement: adım 3, 3 resimden 3.

    • Use a Phillips #1 screwdriver to remove the two screws on the right side of the brush.

    Düzenle

  5. Hoover T-Series WindTunnel Pet UH30310 Vacuum Belt Replacement: adım 4, 3 resimden 1. Hoover T-Series WindTunnel Pet UH30310 Vacuum Belt Replacement: adım 4, 3 resimden 2. Hoover T-Series WindTunnel Pet UH30310 Vacuum Belt Replacement: adım 4, 3 resimden 3.

    • Remove the two screws on the left side of the brush.

    Düzenle

  6. Hoover T-Series WindTunnel Pet UH30310 Vacuum Belt Replacement: adım 5, 3 resimden 1. Hoover T-Series WindTunnel Pet UH30310 Vacuum Belt Replacement: adım 5, 3 resimden 2. Hoover T-Series WindTunnel Pet UH30310 Vacuum Belt Replacement: adım 5, 3 resimden 3.

    • Pull the clear plastic away from the head of the vacuum.

    • Slide the belt off the metal rod with your finger.

    • Pull the brush free.

    Düzenle

  7. Hoover T-Series WindTunnel Pet UH30310 Vacuum Belt Replacement, Vacuum Belt: adım 6, 1 resimden 1.

    • Removal of the brush will also remove the belt.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

2 tane daha katılımcı ile

Erik Ingels

Üyelik tarihi: 01/18/18

193 İtibar

2 adet Kılavuz yazıldı

Rozetler: 2

Ekip

Cal Poly, Team S12-G4, Banghart Winter 2018 Cal Poly, Team S12-G4, Banghart Winter 2018 üyesi

CPSU-BANGHART-W18S12G4

5 Üyeler

9 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 4

Son 30 gün: 17

Her zaman: 765