Eşyalarını Tamir Et Topluluk Mağaza

Hoover T-Series WindTunnel Pet UH70102 Dust Filter Replacement

Giriş

This guide is intended to help you remove your dust filter. This filter can be rinsed if dirty, or replaced if old or dysfunctional. This step should stard with the vacuum unplugged.

Neye ihtiyacın var

  1. Hoover T-Series WindTunnel Pet UH70102 Dust Filter Replacement, Dust Filter: adım 1, 2 resimden 1. Hoover T-Series WindTunnel Pet UH70102 Dust Filter Replacement, Dust Filter: adım 1, 2 resimden 2.

    • Push silver tab located towards top of vacuum to remove dirt cup from vacuum.

    • Press the tab below the Hoover logo to open the lid of dirt cup.

    Düzenle

  3. Hoover T-Series WindTunnel Pet UH70102 Dust Filter Replacement: adım 2, 1 resimden 1.

    • Remove the filter from the top.

    • Rinse under tap water, dry for 24 hours in the sun, and put back in place.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

2 tane daha katılımcı ile

Sophia Stockburger

Üyelik tarihi: 01/22/18

566 İtibar

5 adet Kılavuz yazıldı

Rozetler: 7

+4 tane daha rozet

Ekip

Cal Poly, Team S11-G2, Banghart Winter 2018 Cal Poly, Team S11-G2, Banghart Winter 2018 üyesi

CPSU-BANGHART-W18S11G2

5 Üyeler

9 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 3

Son 30 gün: 21

Her zaman: 2,655