Eşyalarını Tamir Et Topluluk Mağaza

Hoover WindTunnel 2 Rewind Dust Cup Assembly Replacement

Giriş

Replace your dirty or broken dust cup filter with these easy steps!

Neye ihtiyacın var

  1. Hoover WindTunnel 2 Rewind Dust Cup Assembly Replacement, Primary Air Filter: adım 1, 1 resimden 1.

    • Press button on the top of the dust cup and pull back.

    • Remove dust cup from vacuum

    Düzenle

  2. Hoover WindTunnel 2 Rewind Dust Cup Assembly Replacement: adım 2, 1 resimden 1.

    • Pull back on black lever and rotate dust cup lid back.

    Düzenle

  4. Hoover WindTunnel 2 Rewind Dust Cup Assembly Replacement: adım 3, 1 resimden 1.

    • Lift up on fabric flap to remove filter from vaccum

    • If you wish to clean the filter rather than replace it, it can be washed under a faucet.

    • If washing the filter, make sure it fully dries out before re-installing.

    Düzenle

  5. Hoover WindTunnel 2 Rewind Dust Cup Assembly Replacement, Dust Cup Assembly: adım 4, 1 resimden 1.

    • Holding onto both the top handle and dust cup body, twist the two components apart following the instructions printed on the back.

    Düzenle

  6. Hoover WindTunnel 2 Rewind Dust Cup Assembly Replacement: adım 5, 2 resimden 1. Hoover WindTunnel 2 Rewind Dust Cup Assembly Replacement: adım 5, 2 resimden 2.

    • Unscrew the three 4 cm Phillips #3 screws located inside the dust filter compartment to detach the dust filter system.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Yazar

2 tane daha katılımcı ile

Chino Cruz

Üyelik tarihi: 01/22/18

135 İtibar

1 Kılavuz yazıldı

Rozetler: 4

+1 tane daha rozet

Ekip

Cal Poly, Team S11-G4, Banghart Winter 2018 Cal Poly, Team S11-G4, Banghart Winter 2018 üyesi

CPSU-BANGHART-W18S11G4

5 Üyeler

10 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 10

Son 30 gün: 51

Her zaman: 4,609