Eşyalarını Tamir Et Topluluk Mağaza

Hoover Windtunnel Air Steerable Upright Motor Assembly Replacement

Giriş

This guide will help assist you with removing and replacing the motor assembly in your Hoover UH72400.

Neye ihtiyacın var

  1. Hoover Windtunnel Air Steerable Upright Motor Assembly Replacement, HEPA Filter: adım 1, 2 resimden 1. Hoover Windtunnel Air Steerable Upright Motor Assembly Replacement, HEPA Filter: adım 1, 2 resimden 2.

    • Put the cleaner into the upright position, turn the power off, and unplug the power cord.

    Düzenle

  2. Hoover Windtunnel Air Steerable Upright Motor Assembly Replacement: adım 2, 3 resimden 1. Hoover Windtunnel Air Steerable Upright Motor Assembly Replacement: adım 2, 3 resimden 2. Hoover Windtunnel Air Steerable Upright Motor Assembly Replacement: adım 2, 3 resimden 3.

    • Remove the dirt cup from the cleaner.

    • The HEPA filter is located under the dirt cup and under where it says HEPA.

    • Twist the top counterclockwise to unlock the cap.

    Düzenle

  4. Hoover Windtunnel Air Steerable Upright Motor Assembly Replacement: adım 3, 2 resimden 1. Hoover Windtunnel Air Steerable Upright Motor Assembly Replacement: adım 3, 2 resimden 2.

    • Lift the HEPA filter out.

    • Tap the filter against the inside of a trashcan to knock out the dirt and debris or replace as necessary.

    • Do not wash the HEPA Filter.

    Düzenle

  5. Hoover Windtunnel Air Steerable Upright Motor Assembly Replacement, Motor Assembly: adım 4, 3 resimden 1. Hoover Windtunnel Air Steerable Upright Motor Assembly Replacement, Motor Assembly: adım 4, 3 resimden 2. Hoover Windtunnel Air Steerable Upright Motor Assembly Replacement, Motor Assembly: adım 4, 3 resimden 3.

    • Remove the 4 retaining screws and remove the filter tray.

    • Screw lengths are approximately 3/4".

    Düzenle

  6. Hoover Windtunnel Air Steerable Upright Motor Assembly Replacement: adım 5, 1 resimden 1.

    • Pull the motor housing vertically to dislodge the motor.

    Düzenle

  7. Hoover Windtunnel Air Steerable Upright Motor Assembly Replacement: adım 6, 3 resimden 1. Hoover Windtunnel Air Steerable Upright Motor Assembly Replacement: adım 6, 3 resimden 2. Hoover Windtunnel Air Steerable Upright Motor Assembly Replacement: adım 6, 3 resimden 3.

    • Use a plastic spudger or opening tool to press on the small circle and wiggle clips free.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

2 farklı kişi bu kılavuzu tamamladı.

Yazar

3 tane daha katılımcı ile

steven hoover

Üyelik tarihi: 09/26/17

257 İtibar

2 adet Kılavuz yazıldı

Rozetler: 6

+3 tane daha rozet

Ekip

Cal Poly, Team S7-G2, Banghart Fall 2017 Cal Poly, Team S7-G2, Banghart Fall 2017 üyesi

CPSU-BANGHART-F17S7G2

5 Üyeler

14 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 3

Son 7 gün: 19

Son 30 gün: 48

Her zaman: 3,857