Hot Wheels AI Intelligent Race System Controller Batteries Replacement - iFixit Tamir Kılavuzu

Giriş

If your Hot Wheels AI controller does not turn, try replacing the battery. This guide will assist you if you have any trouble. Before you begin, you will need three brand new AAA batteries and a J0 screwdriver. The steps should be straightforward and fast! Once you replace your battery, you will be racing in no time!

Neye ihtiyacın var

Adım 1 Controller Batteries

Hot Wheels AI Intelligent Race System Controller Batteries Replacement, Controller Batteries: adım 1, 1 resimden 1.

Use a JIS #0 screwdriver to unscrew the single battery cover screw.

Adım 2

Hot Wheels AI Intelligent Race System Controller Batteries Replacement: adım 2, 2 resimden 1.

Hot Wheels AI Intelligent Race System Controller Batteries Replacement: adım 2, 2 resimden 2.

Remove the old AAA battery from the slot by pressing down on the positive end.
Do the same for the other two. Make sure none of the battery slots are damaged.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

2 tane daha katılımcı ile

Peter Nguyen

Üyelik tarihi: 09/07/18

261 İtibar

2 adet Kılavuz yazıldı

+4 tane daha rozet

Ekip

Appalachian State University, Team S1-G2, Menagarishvili Fall 2018 Appalachian State University, Team S1-G2, Menagarishvili Fall 2018 üyesi

APSU-MENAGARISHVILI-F18S1G2

2 Üyeler

6 adet Kılavuz yazıldı

0Kılavuz Yorumları

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 3

Son 30 gün: 8

Her zaman: 479