Eşyalarını Tamir Et Topluluk Mağaza

Hover-1 Chrome Outer Shell Replacement

Giriş

To fully access all parts of the Hover-1 Chrome, the entirety of the outer shell must be removed. This guide will go over how to completely remove the outer shell.

Neye ihtiyacın var

  1. Hover-1 Chrome Outer Shell Replacement, Hover-1 Chrome Disassembly: adım 1, 1 resimden 1.

    • Flip the Hover-1 Chrome upside down.

    • Use a Phillips #2 screwdriver to remove the fourteen 14 mm screws from the bottom of the Hover-1.

    • Break the two black tape circles, and remove the two 15 mm Phillips screws underneath.

    Düzenle

  2. Hover-1 Chrome Outer Shell Replacement: adım 2, 1 resimden 1.

    • Lift the shell without the speaker grille and unplug the battery.

    Düzenle

  3. Hover-1 Chrome Outer Shell Replacement: adım 3, 2 resimden 1. Hover-1 Chrome Outer Shell Replacement: adım 3, 2 resimden 2.

    • Lift the shell with the speaker grille.

    • Unplug the speaker.

    • Unplug the LEDs.

    • Unplug the power button

    • Unplug the charging port.

    Düzenle

  5. Hover-1 Chrome Outer Shell Replacement, Outer Shell: adım 4, 1 resimden 1.

    • Remove the twelve 14 mm Phillips #2 screws holding the top shell on.

    • The other six screws are on the side without the battery.

    Düzenle

  6. Hover-1 Chrome Outer Shell Replacement: adım 5, 3 resimden 1. Hover-1 Chrome Outer Shell Replacement: adım 5, 3 resimden 2. Hover-1 Chrome Outer Shell Replacement: adım 5, 3 resimden 3.

    • Free the cables held atop the bracket holding the battery in place.

    • Remove the four 14 mm Phillips #2 screws holding the battery bracket in place.

    • Pull the battery bracket free.

    Düzenle

  7. Hover-1 Chrome Outer Shell Replacement: adım 6, 1 resimden 1.

    • Unplug the cords for the top LEDs.

    • The other side of the board is structurally symmetrical. However instead of going under the battery bracket, these cords go through a zip tie. These cables must be removed from the zip tie in order to continue.

    Düzenle

  8. Hover-1 Chrome Outer Shell Replacement: adım 7, 1 resimden 1.

    • Turn the board over and pull the top panel off.

    Düzenle
Bitiş Çizgisi

Yazar

2 tane daha katılımcı ile

Dylan Prins

Üyelik tarihi: 10/08/18

212 İtibar

1 Kılavuz yazıldı

Rozetler: 5

+2 tane daha rozet

Ekip

Cal Poly, Team S4-G1, White Fall 2018 Cal Poly, Team S4-G1, White Fall 2018 üyesi

CPSU-WHITE-F18S4G1

4 Üyeler

6 adet Kılavuz yazıldı

Bir Yorum

Where can i get a replacement shell?

born4roblox - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 2

Son 7 gün: 8

Son 30 gün: 10

Her zaman: 324