Ana içeriğe geç

Hover-1 Eagle Throttle/Brake Lever Replacement

Neye ihtiyacın var

  1. Hover-1 Eagle Throttle/Brake Lever Replacement, Throttle/Brake Lever: adım 1, 3 resimden 1. Hover-1 Eagle Throttle/Brake Lever Replacement, Throttle/Brake Lever: adım 1, 3 resimden 2. Hover-1 Eagle Throttle/Brake Lever Replacement, Throttle/Brake Lever: adım 1, 3 resimden 3.
    • Unscrew the scooter handle.

    • The scooter handles are left-handed or reverse threaded, so twist clockwise to remove them.

  2. Hover-1 Eagle Throttle/Brake Lever Replacement: adım 2, 3 resimden 1. Hover-1 Eagle Throttle/Brake Lever Replacement: adım 2, 3 resimden 2. Hover-1 Eagle Throttle/Brake Lever Replacement: adım 2, 3 resimden 3.
    • Push back the fastening clips by wedging the plastic spudger between the clip and the throttle handle.

    • Insert iFixit opening picks between each fastening clip and the throttle handle to prevent re-fastening.

    • Pull the throttle lever off gently by pulling towards you.

    • The spring housed in the handle can sometimes send the lever flying. Maintain a firm grip on the throttle lever.

  3. Hover-1 Eagle Throttle/Brake Lever Replacement: adım 3, 3 resimden 1. Hover-1 Eagle Throttle/Brake Lever Replacement: adım 3, 3 resimden 2. Hover-1 Eagle Throttle/Brake Lever Replacement: adım 3, 3 resimden 3.
    • To reassemble, insert the spring into the placement hole, housed inside the throttle handle. Insert the other end of the spring into the placement hole inside the throttle body housing.

  4. Hover-1 Eagle Throttle/Brake Lever Replacement: adım 4, 3 resimden 1. Hover-1 Eagle Throttle/Brake Lever Replacement: adım 4, 3 resimden 2. Hover-1 Eagle Throttle/Brake Lever Replacement: adım 4, 3 resimden 3.
    • Twist the throttle lever back to its original orientation by rotating it to the left.

    • Apply pressure to the throttle handle until you hear the fastening clips take hold the of the throttle lever.

    • Make sure the throttle lever is fully inserted and flush with the display throttle body.

  5. Hover-1 Eagle Throttle/Brake Lever Replacement: adım 5, 3 resimden 1. Hover-1 Eagle Throttle/Brake Lever Replacement: adım 5, 3 resimden 2. Hover-1 Eagle Throttle/Brake Lever Replacement: adım 5, 3 resimden 3.
    • Reattach the scooter handle.

    • Make sure to twist the handles counterclockwise to tighten.

Bitiş Çizgisi

4 farklı kişi bu kılavuzu tamamladı.

Andrew Gaskell

Üyelik tarihi: 01/23/20

1.008 İtibar

5 adet Kılavuz yazıldı

Ekip

Cal Poly, Team S1-G2, White Winter 2020 Cal Poly, Team S1-G2, White Winter 2020 üyesi

CPSU-WHITE-W20S1G2

4 Üyeler

6 adet Kılavuz yazıldı

24 Yorum

Great detail……….. Where can I buy the replacement part (throttle) the company hover1 isn't answering me and they don't have this part on their website. Thanks

hanjna76 - Yanıt

Im needed a throttle did anyone have any luck?

rodarte_amanda1992 -

Where do I buy the part where do I get it please let me know The brake lever

poorbubbaa - Yanıt

Necesito acelerador y no lo encuentro.

Josue Villanueva - Yanıt

I cant squeeze the spudger and the pick between this and the spudger broke…what the!!!

Cheri Rael - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 11

Son 30 gün: 89

Her zaman: 15,388