Giriş

Battery is the major element to provide electricity for hover board. When the battery is damaged, replacing the battery to keep the hover board running.

  1. First, remove both of the top outer cover (left and right side) by unscrewing the twenty screws using the number 1 Philips screwdriver in  iFixit Toolkit's that connect the top and bottom outer cover. First, remove both of the top outer cover (left and right side) by unscrewing the twenty screws using the number 1 Philips screwdriver in  iFixit Toolkit's that connect the top and bottom outer cover. First, remove both of the top outer cover (left and right side) by unscrewing the twenty screws using the number 1 Philips screwdriver in  iFixit Toolkit's that connect the top and bottom outer cover.
    • First, remove both of the top outer cover (left and right side) by unscrewing the twenty screws using the number 1 Philips screwdriver in iFixit Toolkit's that connect the top and bottom outer cover.

  2. Pro Tech Toolkit içeren veya $100tüm siparişlerde ücretsiz kargo!

    Mağazamıza Göz Atın
  3. Once removed the outer layer, unscrew all the screws that screwed the cover for the battery (e.g. the one pointed by red arrow in figure 1) using the number 1 Philips screwdriver in the iFixit Toolkit. Once removed the outer layer, unscrew all the screws that screwed the cover for the battery (e.g. the one pointed by red arrow in figure 1) using the number 1 Philips screwdriver in the iFixit Toolkit. Once removed the outer layer, unscrew all the screws that screwed the cover for the battery (e.g. the one pointed by red arrow in figure 1) using the number 1 Philips screwdriver in the iFixit Toolkit.
    • Once removed the outer layer, unscrew all the screws that screwed the cover for the battery (e.g. the one pointed by red arrow in figure 1) using the number 1 Philips screwdriver in the iFixit Toolkit.

  4. After unscrew the screws, move away the plastic cover on the top of the battery. Unplug the cables that connect to the battery  and replace a new battery. After unscrew the screws, move away the plastic cover on the top of the battery. Unplug the cables that connect to the battery  and replace a new battery. After unscrew the screws, move away the plastic cover on the top of the battery. Unplug the cables that connect to the battery  and replace a new battery.
    • After unscrew the screws, move away the plastic cover on the top of the battery. Unplug the cables that connect to the battery and replace a new battery.

Sonuç

To reassemble the device, follow these instructions in reverse order.

Ziru Mo

Üyelik tarihi: 22-10-2018

97 İtibar

1 Kılavuz yazıldı

Takım

UC Davis, Team S7-G2, Lore Fall 2018 UC Davis, Team S7-G2, Lore Fall 2018 üyesi

UCD-LORE-F18S7G2

3 Üyeler

4 adet Kılavuz yazıldı

0 Yorum

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 1

Son 30 Gün: 1

Her zaman: 46