Ana içeriğe geç
Onarım Topluluğuna Katılın - Hesap Oluşturun

Hover-1 Maverick Battery Replacement

Neye ihtiyacın var

  1. Hover-1 Maverick Battery Replacement, Battery: adım 1, 2 resimden 1. Hover-1 Maverick Battery Replacement, Battery: adım 1, 2 resimden 2.
    • Remove the twenty 15mm Phillips #1 screws from the shell of the hoverboard.

    • Remove the shell.

    FixBot'a Sor
  2. Hover-1 Maverick Battery Replacement: adım 2, 3 resimden 1. Hover-1 Maverick Battery Replacement: adım 2, 3 resimden 2. Hover-1 Maverick Battery Replacement: adım 2, 3 resimden 3.
    • Remove the four 8mm Phillips #1 screws holding down the black plastic casing.

    • Lift off the black plastic retaining bracket.

    FixBot'a Sor
  3. Hover-1 Maverick Battery Replacement: adım 3, 2 resimden 1. Hover-1 Maverick Battery Replacement: adım 3, 2 resimden 2.
    • Pull the battery upward lightly to remove from the device.

    • The battery is secured to the device with adhesive tape.

    FixBot'a Sor
Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Piper Feldman

Üyelik tarihi: 01/23/20

409 İtibar

4 adet Kılavuz yazıldı

Ekip

Cal Poly, Team S2-G2, White Winter 2020 Cal Poly, Team S2-G2, White Winter 2020 üyesi

CPSU-WHITE-W20S2G2

2 Üyeler

4 adet Kılavuz yazıldı

2Kılavuz Yorumları

What voltage should the battery put out? Mines is 30v, charger is green at the wall but still the board won’t turn on

Barry Rogers - Yanıt Paylaş

Where can I find that same battery i cant find one

Toad Blue - Yanıt Paylaş

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 25

Son 30 gün: 106

Her zaman: 3,907