Eşyalarını Tamir Et Topluluk Mağaza

Hover-1 XLS Back Seat Light Replacement

Giriş

A broken light on a Hover-1 XLS bike is a safety hazard, especially if you use the bike when dark. Do not ride the bike with a broken tail light.

Neye ihtiyacın var

  1. Hover-1 XLS Back Seat Light Replacement, Back Seat Light: adım 1, 2 resimden 1. Hover-1 XLS Back Seat Light Replacement, Back Seat Light: adım 1, 2 resimden 2.

    • Remove the seat by removing the six 16mm screws with a Phillips #2 screwdriver.

    • Remember that the seat is still connected by the wiring once you unscrew it. Pulling too hard can damage the connector.

    Düzenle

  2. Hover-1 XLS Back Seat Light Replacement: adım 2, 3 resimden 1. Hover-1 XLS Back Seat Light Replacement: adım 2, 3 resimden 2. Hover-1 XLS Back Seat Light Replacement: adım 2, 3 resimden 3.

    • Disconnect the wires by pushing the levers on either side of the connector and on top.

    • Remove the seat from the bike.

    Düzenle

  4. Hover-1 XLS Back Seat Light Replacement: adım 3, 1 resimden 1.

    • Use a Phillips #2 screwdriver to remove the four 10mm screws on the bottom of the back seat.

    Düzenle

  5. Hover-1 XLS Back Seat Light Replacement: adım 4, 2 resimden 1. Hover-1 XLS Back Seat Light Replacement: adım 4, 2 resimden 2.

    • Pull the light from behind the bottom of the seat frame. Pull the wiring all the way through.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Yazar

3 tane daha katılımcı ile

Christian Roberts

Üyelik tarihi: 01/24/19

248 İtibar

1 Kılavuz yazıldı

Rozetler: 9

+6 tane daha rozet

Ekip

Cal Poly, Team S1-G2, White Winter 2019 Cal Poly, Team S1-G2, White Winter 2019 üyesi

CPSU-WHITE-W19S1G2

3 Üyeler

6 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 4

Her zaman: 337