1. remove the three Phillips screws under the fan closest to the video ports of the card
    • remove the three Phillips screws under the fan closest to the video ports of the card

  2. Pro Tech Toolkit içeren veya $100,00tüm siparişlerde ücretsiz kargo!

    Mağazamıza Göz Atın
  3. Lift the fan out(will be attached to a small cord but gets out of the way well)  and shim a small cushion under the center circle, between the aluminum cooling fins and the plastic. I used electric tape, rolling it, sticky side in, to form about a 6 layer small square of tape. It shimmed in nicely.
    • Lift the fan out(will be attached to a small cord but gets out of the way well) and shim a small cushion under the center circle, between the aluminum cooling fins and the plastic. I used electric tape, rolling it, sticky side in, to form about a 6 layer small square of tape. It shimmed in nicely.

  4. Reassemble and re-install the card into your computer. It should stop the vibration.
    • Reassemble and re-install the card into your computer. It should stop the vibration.

Sonuç

To reassemble your device, follow these instructions in reverse order.

8 başka kişi bu kılavuzu tamamladı.

Matthew Johnson

Üyelik tarihi: 07-04-2012

392 İtibar

1 Kılavuz yazıldı

Bir Yorum

Can you post a picture showing how its fit in the fins?

Gustavo Horta - Yanıt

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 Gün: 3

Son 30 Gün: 11

Her zaman: 7,290