Giriş
Use this video tutorial and learn how to calibrate a gimbal on DJI Mavic Air 2.
If your PC does not detect your drone and the drone is listed as a "bulk interface" or unknown device in the device manager, most likely your PC did not find drivers for your drone. In this case, download and install DJI Assistant 2.
Download links
Python: https://www.python.org/
PySerial: https://pypi.org/project/pyserial/#files
GitHub: https://github.com/o-gs/dji-firmware-too...
7-zip: https://7-zip.org/
DJI Assistant: https://www.dji.com/es/downloads/softwar...
Script
Step 1: py comm_og_service_tool.py --port com pcode GimbalCalib JointCoarse
Step 2: py comm_og_service_tool.py --port com pcode GimbalCalib LinearHall
Video talimatları
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
7 Yorum
I replaced the coxial cable and gimbal and i can get it to calibrate on the linear?
Harrison - Yanıt
How to calibrate the Air 2s gimbal camera after replacing a new one?
Jimmy Chan - Yanıt
Im going through the same thing, ive watched about 20 youtube videos and followed about 4 step by step and my gimbal still wont calibrate...
Chris Baillio - Yanıt
I can get my Air 2s to calibrate on Joint Course, but it's unresponsive to the Linear Hall command. Any solutions?
Brett Wallace - Yanıt
py setup.py install returns a module not found error message.
Jonathan maendel - Yanıt