Ana içeriğe geç

How to Change the Oil for the Honda EU2200IT A2

Neye ihtiyacın var

  1. How to Change the Oil for the Honda EU2200IT A2, Honda EU2200IT A2 Safety Precautions: adım 1, 1 resimden 1.
    • Before you begin, make sure the generator is switched off and the generator is cool to the touch.

  2. How to Change the Oil for the Honda EU2200IT A2, Disconnect the spark plug: adım 2, 2 resimden 1. How to Change the Oil for the Honda EU2200IT A2, Disconnect the spark plug: adım 2, 2 resimden 2.
    • Lift and remove the spark plug cover.

  3. How to Change the Oil for the Honda EU2200IT A2: adım 3, 2 resimden 1. How to Change the Oil for the Honda EU2200IT A2: adım 3, 2 resimden 2.
    • Grab the plastic housing at the end of the spark plug wire.

    • Pull firmly to disconnect the wire from the spark plug.

  4. How to Change the Oil for the Honda EU2200IT A2, Remove the maintenance cover: adım 4, 1 resimden 1.
    • Use a Phillips #2 screwdriver to loosen the screw holding the maintenance cover in place.

  5. How to Change the Oil for the Honda EU2200IT A2: adım 5, 3 resimden 1. How to Change the Oil for the Honda EU2200IT A2: adım 5, 3 resimden 2. How to Change the Oil for the Honda EU2200IT A2: adım 5, 3 resimden 3.
    • Swing the top of the maintenance cover out.

    • Remove the maintenance cover.

  6. How to Change the Oil for the Honda EU2200IT A2, Drain the engine oil: adım 6, 2 resimden 1. How to Change the Oil for the Honda EU2200IT A2, Drain the engine oil: adım 6, 2 resimden 2.
    • Unscrew and remove the oil filler cap.

  7. How to Change the Oil for the Honda EU2200IT A2: adım 7, 2 resimden 1. How to Change the Oil for the Honda EU2200IT A2: adım 7, 2 resimden 2.
    • Place an oil pan below the fill port to catch the engine oil.

    • Carefully tilt the generator towards the oil pan to drain the oil.

  8. How to Change the Oil for the Honda EU2200IT A2: adım 8, 1 resimden 1.
    • During reassembly, be sure to refill the engine oil:

    • If you recently resealed the crankcase cover with liquid sealant, wait at least 20 minutes before adding oil.

    • Use SAE 10W-30 oil, up to 0.46 US quarts.

    • Add oil until the dipstick is almost completely submerged.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Arthur Shi

Üyelik tarihi: 01/03/18

253.505 İtibar

526 adet Kılavuz yazıldı

Ekip

iFixit iFixit üyesi

Staff

135 Üyeler

17.198 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 10

Son 30 gün: 57

Her zaman: 3,513