Ana içeriğe geç

Bu kılavuzda güncel değişiklikler var. En son onaylanmamış sürüme geçin.

How to Clean the Anker 2.4G Wireless Mouse Scroll Wheel

Neye ihtiyacın var

  1. How to Clean the Anker 2.4G Wireless Mouse Scroll Wheel, How to Clean the Anker 2.4G Wireless Mouse Scroll Wheel: adım 1, 1 resimden 1.
    • Use a screwdriver to remove the stickers that are hiding the screws.

  2. How to Clean the Anker 2.4G Wireless Mouse Scroll Wheel: adım 2, 1 resimden 1.
    • Remove 4 screws Phillips #0 screws.

  3. How to Clean the Anker 2.4G Wireless Mouse Scroll Wheel: adım 3, 2 resimden 1. How to Clean the Anker 2.4G Wireless Mouse Scroll Wheel: adım 3, 2 resimden 2.
    • Use a screwdriver to pry along the center seam of the mouse.

    • Open the outer casing of the mouse.

  4. How to Clean the Anker 2.4G Wireless Mouse Scroll Wheel: adım 4, 1 resimden 1.
    • Remove the wires from the white crimp headers in order to separate the upper and lower housing units of the mouse.

    • Pull the wires as gently as possible to ensure that the wires will not break.

  5. How to Clean the Anker 2.4G Wireless Mouse Scroll Wheel: adım 5, 2 resimden 1. How to Clean the Anker 2.4G Wireless Mouse Scroll Wheel: adım 5, 2 resimden 2.
    • Take a q-tip and lightly remove any dirt or debris around the pin connections of the scroll wheel (circled in red).

Sonuç

To reassemble your device, follow these instructions in reverse order.

5 farklı kişi bu kılavuzu tamamladı.

Colin

Üyelik tarihi: 02/10/14

406 İtibar

3 adet Kılavuz yazıldı

Ekip

Cal Poly, Team 1-39, Maness Winter 2014 Cal Poly, Team 1-39, Maness Winter 2014 üyesi

CPSU-MANESS-W14S1G39

4 Üyeler

16 adet Kılavuz yazıldı

Bir Yorum

You don’t tell how to put the stickers back because they won’t stick again…

p.pisu - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 20

Son 30 gün: 99

Her zaman: 14,997