Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

Giriş

The Auto Boot feature powers on your laptop as soon as you open the lid, so it should be disabled before undertaking certain repairs. Auto Boot can be found on 2016 (and newer) MacBook Pros and 2017 (and newer) 12" Retina MacBooks.

This guide will walk you through the process of disabling Auto Boot, and then re-enabling it when your repair is complete.

Note: Disabling Auto Boot may not work on Apple’s newer ARM-based M1 MacBook Pro or MacBook Air, released in late 2020. At this time, we don’t know any procedure for disabling Auto Boot on devices equipped with Big Sur v11.1 or later.

  1. Power on your Mac and launch Terminal. To launch Terminal, you can either use Spotlight Search or navigate to Applications / Utilities in Finder and double click the Terminal icon. To launch Terminal, you can either use Spotlight Search or navigate to Applications / Utilities in Finder and double click the Terminal icon.
    • Power on your Mac and launch Terminal.

    • To launch Terminal, you can either use Spotlight Search or navigate to Applications / Utilities in Finder and double click the Terminal icon.

  2. Copy and paste the following command (or type it exactly) into Terminal: sudo nvram AutoBoot=%00
    • Copy and paste the following command (or type it exactly) into Terminal:

    • sudo nvram AutoBoot=%00

    • Press [return].

    • Your [return] key may also be labeled ⏎ or [enter].

    • If you are prompted for an administrative password, type the password and press [return].

    • Your password will not be displayed in Terminal.

  3. You can now safely power down your Mac and remove the bottom case, without it accidentally powering on.
    • You can now safely power down your Mac and remove the bottom case, without it accidentally powering on.

    • Remember, you must still disconnect the battery before servicing internal components.

  4. When your repair is complete and your Mac is successfully reassembled, you can re-enable the Auto Boot feature. Power on your Mac and launch Terminal. Copy and paste the following command (or type it exactly) into Terminal:
    • When your repair is complete and your Mac is successfully reassembled, you can re-enable the Auto Boot feature.

    • Power on your Mac and launch Terminal.

    • Copy and paste the following command (or type it exactly) into Terminal:

    • sudo nvram AutoBoot=%03

    • Press [return].

    • If you are prompted for an administrative password, type the password and press [return].

    • Your password will not be displayed in Terminal.

    • Alternatively, you may reset your Mac's NVRAM to re-enable Auto Boot.

Sonuç

Congrats! You're done.

16 farklı kişi bu kılavuzu tamamladı.

Jeff Suovanen

Üyelik tarihi: 06-08-2013

340.494 İtibar

257 adet Kılavuz yazıldı

Takım

iFixit iFixit üyesi

Community

135 Üyeler

15.044 adet Kılavuz yazıldı

9 Yorum

hello may i ask, how do u make it Jeff$? mine’s scarlet$ and i want to change it but idk how

srhshahdzan - Yanıt

I can’t type anything into the terminal…what am I doing wrong?

Linda Sussman - Yanıt

HELP

it doesn’t work on MacBook Air><

my sister’s pro did work, thanks!! but mine can’t do so. what should I do???

Ching-Hsien Chou - Yanıt

This code change DOES NOT work.

MFMauceri - Yanıt

This was a great help to replace my MacBook Pro battery. Great step by step explanations. I received kit and followed the directions.

Simon Tezzo - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 43

Son 7 gün: 297

Son 30 gün: 1,515

Her zaman: 25,731