Ana içeriğe geç

Giriş

This guide will show you how to replace the batteries in a Schlage door lock. The main problem with these locks is their batteries. Sometimes, while trying to open the door, you see a red flashing light instead of a green one, which indicates that the batteries need to be replaced.

Parçalar

  1. Remove the two 3 mm Phillips #1 screws from the battery cover. Remove the two 3 mm Phillips #1 screws from the battery cover. Remove the two 3 mm Phillips #1 screws from the battery cover.
    • Remove the two 3 mm Phillips #1 screws from the battery cover.

  2. Remove the battery cover slowly. Remove the battery cover slowly.
    • Remove the battery cover slowly.

  3. Remove the batteries one by one from the interior assembly. Remove the batteries one by one from the interior assembly.
    • Remove the batteries one by one from the interior assembly.

  4. Install four AA batteries in the battery pack. Install four AA batteries in the battery pack.
    • Install four AA batteries in the battery pack.

  5. Reinstall the battery cover. Reinstall the battery cover.
    • Reinstall the battery cover.

  6. Use the Phillips #1 screwdriver to tighten the screws.
    • Use the Phillips #1 screwdriver to tighten the screws.

Bitiş Çizgisi

Dorsa Akrami

Üyelik tarihi: 19-09-2020

133 İtibar

1 Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 5

Son 30 gün: 9

Her zaman: 55