Ana içeriğe geç

Giriş

This Fast Fix guide is a step by step instruction manual on how to repair an insecure leg rest on a Wolf Warriors gaming chair. With excessive use, leg rests may become wobbly and unstable. This guide outlines how to fix a Wolf Warriors gaming chair leg rest for ultimate comfort.

Aletler

Parçalar

Hiçbir parça belirtilmedi.

  1. Lean back the chair and extend the leg rest completely. Lean back the chair and extend the leg rest completely.
    • Lean back the chair and extend the leg rest completely.

  2. Lay the chair on its side on the ground to allow easier access to the required hex screws and blocker screw.
    • Lay the chair on its side on the ground to allow easier access to the required hex screws and blocker screw.

  3. Remove the 3 mm blocker screw using a 3mm Allen wrench/hex key. Remove the 3 mm blocker screw using a 3mm Allen wrench/hex key. Remove the 3 mm blocker screw using a 3mm Allen wrench/hex key.
    • Remove the 3 mm blocker screw using a 3mm Allen wrench/hex key.

  4. Slide the leg rest out of the base.
    • Slide the leg rest out of the base.

  5. Place the leg rest on a flat surface. Wipe clean the sliding legs using a clean cloth to ensure the sliding mechanism has no issues.
    • Place the leg rest on a flat surface.

    • Wipe clean the sliding legs using a clean cloth to ensure the sliding mechanism has no issues.

  6. Tighten the four 25 mm hex screws located at the bottom of the chair using the 3 mm Allen key. Be careful not to over tighten the 25 mm hex screws. This can cause the screw to become free from the base. Be careful not to over tighten the 25 mm hex screws. This can cause the screw to become free from the base.
    • Tighten the four 25 mm hex screws located at the bottom of the chair using the 3 mm Allen key.

    • Be careful not to over tighten the 25 mm hex screws. This can cause the screw to become free from the base.

  7. Slide the leg rest back into the base.
    • Slide the leg rest back into the base.

  8. Screw the 3 mm blocker screw back in. Flip your chair back up and enjoy your sturdy leg rest!
    • Screw the 3 mm blocker screw back in.

    • Flip your chair back up and enjoy your sturdy leg rest!

Sonuç

To reassemble your device, follow these instructions in reverse order.

Anoop Shahi

Üyelik tarihi: 17-01-2021

157 İtibar

1 Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 3

Her zaman: 70