How to Fix an Unstable Ikea Poang Chair

Erik Romanski ve 2 diğer katkıda bulunanlar

En son September 12, 2024 tarihinde güncellendi

20 dakika

Kolay

İşlem Görüntüleri

Giriş

1. adıma git

If the Poang-style chair sold by IKEA is assembled incorrectly, it can cause the seat to dip and tip when it's sat on. This guide will describe the steps necessary to fix this problem and otherwise increase the stability of the chair.

Neye ihtiyacın var

Aletler

1/8" Allen Wrench
Ortaklık bağlantısı
Amazon tedarikçisinden satışta
Görüntüle

iFixit bu bağlantılar üzerinden satın aldığınızda komisyon kazanır.

Adım 1 How to Fix an Unstable Ikea Poang Chair

How to Fix an Unstable Ikea Poang Chair, How to Fix an Unstable Ikea Poang Chair: adım 1, 1 resimden 1.

Start by removing the seat cushion from the frame.

Düzenle

Adım 2

How to Fix an Unstable Ikea Poang Chair: adım 2, 3 resimden 3.

Remove the upper bolt, which attaches the back of the seat to the armrests.
Remove the lower bolt, which is the upper bolt attaching the seat to the legs.
Remove the same bolts on the opposite side of the chair.

Düzenle

Adım 3

To loosen the bolts, turn the Allen wrench to the LEFT, as shown in the video.

Düzenle

Adım 4

Separate the back and seat of the chair from the legs and the armrest.

Düzenle

Adım 5

Re-attach the bolts removed in Steps 2 and 3. Put each bolt into the correct location before tightening each bolt.
If the bolt attaching the seat tightens too easily, it is not in the hole and rests above or below the wood of the seat. This is what causes the tipping or dipping of the seat.
When attaching the bolt for the back of the chair, insert a plastic washer between the wood of the chair leg and the wood of the chair back. Without this washer, the two pieces will not sit flush. This allows the chair to shift and may cause the chair to become unstable.