Ana içeriğe geç
Onarım Topluluğuna Katılın - Hesap Oluşturun

How to Get Dents Out of Wood

Görüntüleme: 2,6 B

İstatistikleri görüntüle:

Son 24 Saat:
3
Son 7 Gün:
40
Son 30 Gün:
156
Her zaman:
2.556
Yorumlar: 1

1 comment on steps.

Tamamlandı: 2

2 kişi bu kılavuzu "tamamlandı" olarak işaretledi. Sıradaki sen olacak mısın?

Sık Kullanılanlar: 0

Hiç kimse bu kılavuzu favorilere eklemedi (ve abone olmadı). İlk mi olacaksın?

Gerekli Süre: 20 - 30 dakika
Zorluk: Çok kolay
How to Get Dents Out of Wood

Today wood is expensive, so replacing dented or damaged wood can get extremely costly. Wooden counters and tabletops can be dented by everyday wear and tear. This step-by-step guide will teach you how to properly get dents out of wooden surfaces using just a household flat iron and a wet hand towel. Be sure to know how your own household flat iron operates to avoid injury.

Neye ihtiyacın var

    1. How to Get Dents Out of Wood, How to Get Dents Out of Wood: adım 1, 3 resimden 1. How to Get Dents Out of Wood, How to Get Dents Out of Wood: adım 1, 3 resimden 2. How to Get Dents Out of Wood, How to Get Dents Out of Wood: adım 1, 3 resimden 3.
      • Fill a medium-sized bowl with room-temperature water.

      • Dip a hand towel into the bowl of water.

      • Wring the hand towel out a bit until it is damp rather than dripping wet.

      FixBot'a Sor

      Yorum Ekle

    2. How to Get Dents Out of Wood: adım 2, 2 resimden 1. How to Get Dents Out of Wood: adım 2, 2 resimden 2.
      • In the wood surface, find the dent you wish to remove.

      • Place the damp hand towel over the dented area as flat as possible.

      FixBot'a Sor

      Yorum Ekle

    3. How to Get Dents Out of Wood: adım 3, 2 resimden 1. How to Get Dents Out of Wood: adım 3, 2 resimden 2.
      • Set your flat iron to its highest setting.

      • Do NOT touch the metal part of the flat iron while it is on.

      FixBot'a Sor

      Yorum Ekle

    4. How to Get Dents Out of Wood: adım 4, 3 resimden 1. How to Get Dents Out of Wood: adım 4, 3 resimden 2. How to Get Dents Out of Wood: adım 4, 3 resimden 3.
      • Firmly press the flat iron down on the damp hand towel.

      • While pressing down, move the iron in circular or back and forth motions.

      FixBot'a Sor

      Yorum Ekle

    5. How to Get Dents Out of Wood: adım 5, 1 resimden 1.
      • Continue the circular or back and forth motions until the hand towel is dry.

      FixBot'a Sor

      Yorum Ekle

    6. How to Get Dents Out of Wood: adım 6, 1 resimden 1.
      • Repeat steps 1-5 until the dent is gone.

      • Turn off the flat iron after finishing.

      • Be sure to allow time for the iron to cool down after turning it off. Do NOT touch the metal or place it face down during this time.

      FixBot'a Sor

      Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

İptal et: Bu kılavuzu tamamlamadım.

2 farklı kişi bu kılavuzu tamamladı.

Yazar

ile

Matthew Clarke

Üyelik tarihi: 01/26/23

187 İtibar

1 Kılavuz yazıldı

Ekip

UC Davis, Team 1-12, Morris Winter 2023 UC Davis, Team 1-12, Morris Winter 2023 üyesi

UCD-MORRIS-W23S1G12

3 Üyeler

12 adet Kılavuz yazıldı

0Kılavuz Yorumları

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 3

Son 7 gün: 40

Son 30 gün: 156

Her zaman: 2,556