Aletler

  1. Shoe polish can be used to visualize the scratches. Rub a small amount of dark shoe polish over the scratch.
    • Shoe polish can be used to visualize the scratches. Rub a small amount of dark shoe polish over the scratch.

    Yorum Ekle

  2. Wipe the shoe polish over the panel. This fills the scratches with polish.
    • Wipe the shoe polish over the panel. This fills the scratches with polish.

    Yorum Ekle

    • Block sand the panel with 2000-grit wet/dry sandpaper and plenty of water. Sand until the shoe polish disappears.

    Yorum Ekle

    • Polish out the sanding scratches with rubbing compound.

    Yorum Ekle

    • A polishing wheel makes short work of bringing the shine back. An oscillating polisher is less aggressive than this rotary polisher.

    • Don't buff through the paint into the next layer, especially on high-crown or sharp edges.

    Someone keyed my vehicle with profanity and I just want to be able to get the words to not be so noticeable u til I get it into the shop. Will this work well enough!

    Dawnmarie - Yanıt

    • Finish with light hand buffing to remove the last of the compound. Follow with car wax.

    Yorum Ekle

Bitiş Çizgisi

17 başka kişi bu kılavuzu tamamladı.

Brian Sallee

Üyelik tarihi: 07-03-2012

1.657 İtibar

1 Kılavuz yazıldı

Takım

iFixit iFixit üyesi

Community

114 Üyeler

7.024 adet Kılavuz yazıldı

Bir Yorum

Don’t you need to put the clear coat on the paint before waxing?

Richard E Riman - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 3

Son 7 Gün: 15

Son 30 Gün: 62

Her zaman: 7,137