How to Repair Displaced Engine Gears in a Remote Controlled Helicopter

Yazan: Neil Wolfe (ve 6 başka katılımcı)

Yorumlar: 0
Favoriler: 2
Tamamlanma: 2

How to Repair Displaced Engine Gears in a Remote Controlled Helicopter

Zorluk

Orta

Adımlar

Gerekli Süre

10 - 20 dakika

Giriş

If the rotors will not turn on your RC Heli and it will not take off, you might have knocked one of the engine conversion gears out of place. Easily access the gear box of your helicopter and repair it with this easy fix.

Aletler

Bu aletleri satın al

Screwdriver

$29,99

Satın Al

Parçalar

Hiçbir parça belirtilmedi.

Adım 1 How to Repair Displaced Engine Gears in a Remote Controlled Helicopter

Locate the problematic engine gear inside the helicopter frame.

Locate the problematic engine gear inside the helicopter frame.
It will seem out of place and will not connect with the rotor gear.
The white gear can be clearly seen out of place and not in contact with the upper rotor gear. This does not allow the blades to spin.

Düzenle

Adım 2

Grab the screwdriver that will fit the screws on your specific model.

Grab the screwdriver that will fit the screws on your specific model.
The screws may not be the same sizes on your RC Heli.
Keep track of where the screws came from.

Düzenle

Adım 3

Unscrew the decorative/protective shroud blocking your access to the inside of the helicopter.

Unscrew the decorative/protective shroud blocking your access to the inside of the helicopter.

Düzenle

Adım 4

If it is possible to reset the gear without unscrewing further, attempt to push the gear back up into place on the motor shaft with a screwdriver or your finger.

If it is possible to reset the gear without unscrewing further, attempt to push the gear back up into place on the motor shaft with a screwdriver or your finger.
If this works you have fixed the gear and can skip to step 7.
If the gear is inaccessible you will have to open the frame, go to step 5.

Düzenle

Adım 5

Unscrew one side of the frame and set it aside, allowing access to the gear.

Make sure all the screws and frame pieces are kept in a secure location.

Unscrew one side of the frame and set it aside, allowing access to the gear.
Make sure all the screws and frame pieces are kept in a secure location.

Düzenle

Adım 6

Place the screwdriver's tip underneath the clear motor gear.

Firmly push the gear back up into place so that it correctly connects with the main rotor gear.

Place the screwdriver's tip underneath the clear motor gear.
Firmly push the gear back up into place so that it correctly connects with the main rotor gear.
See the last picture for a proper gear connecion visual.

Düzenle

Adım 7

Return all the pieces to their original place inside the frame.

Screw the frame tightly back into place.

Return all the pieces to their original place inside the frame.
Screw the frame tightly back into place.

Düzenle

Adım 8

If it works then the helicopter is fixed and you can screw the shroud back into place.

Test the helicopter for functionality.
If it works then the helicopter is fixed and you can screw the shroud back into place.

Düzenle

Sonuç

To reassemble, after testing for functionality, make sure all inner parts are back in their original location. Screw the frame and shroud tightly back in place.

2 farklı kişi bu kılavuzu tamamladı.