If the applicator of your liquid eyeliner is bent, don’t throw it out! Learn how to restore it to working order with this easy fix. You will find all the necessary tools right in your kitchen. By repairing the eyeliner, you will prolong its lifespan and reduce the amount of plastic and chemical waste that ends up in the environment.


Hiçbir parçaya gerek yok.

  1. Remove the cap of the eyeliner.
    • Remove the cap of the eyeliner.

  2. Wrap the eyeliner applicator tightly with plastic wrap.
    • Wrap the eyeliner applicator tightly with plastic wrap.

    • The plastic wrap should be just large enough to cover the applicator.

    • Smooth the bent bristles of the applicator in the same direction.

    • Smooth the excess plastic wrap along the body of the eyeliner.

    • Secure the plastic wrap tightly with a rubber band.

    • The rubber band should circle the middle of the applicator.

    • Check to make sure there are no holes in the plastic wrap.

    • Fill a pot with water.

    • The water level should be high enough to cover the tip of the eyeliner.

    • Boil the water.

    • Turn off the heat once the water has reached a boil.

    • Hold the eyeliner vertically above the pot of water. The applicator should be facing down.

    • Place the eyeliner applicator into the boiled water for 1 minute.

    • Do not submerge the eyeliner further than the applicator.

    • Carefully remove the rubber band and the plastic wrap.

    • Great Job! Your eyeliner is ready to be used again.


This fix is a great alternative to throwing away eyeliner that still has plenty of pigment. You'll be saving money AND the environment. What could be better?

Bir başkası bu kılavuzu tamamladı.

Tracy Sam

Üyelik tarihi: 26-10-2018

172 İtibar

1 Kılavuz yazıldı


UC Davis, Team S2-G4, Bender Fall 2018 UC Davis, Team S2-G4, Bender Fall 2018 üyesi


2 Üyeler

1 Kılavuz yazıldı

0 Yorum

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 Gün: 1

Son 30 Gün: 1

Her zaman: 27