How to Repair a Christmas Tree Light Wire

Giriş

Don't let a broken Christmas tree wire ruin your Christmas spirit. In this guide you will follow step by step instructions on how to save Christmas by repairing your broken Christmas tree wire.

Neye ihtiyacın var

Adım 1 How to Repair a Christmas Tree Light Wire

How to Repair a Christmas Tree Light Wire, How to Repair a Christmas Tree Light Wire: adım 1, 1 resimden 1.

Unplug the lighting.

Düzenle

Adım 2

Using the wire strippers, split both wires apart approximately one inch.

Düzenle

Adım 3

Using the wire strippers, strip about an inch of insulation off of each wire.
Use appropriate wire gauge when stripping. A good practice is to start with large gauge and work your way down.

Düzenle

Adım 4

Twist all four copper strands.
This will make it easier to work with and help prevent fraying.

Düzenle

Adım 5

Insert the heat shrink tubing on the longer end of your wire.
Once the heat shrink is on your wire, slide it out of your way. We will address the heat shrink in Step 9.

Düzenle

Adım 6

How to Repair a Christmas Tree Light Wire: adım 6, 3 resimden 3.

Cross and twist the wires together to create a connection.
This helps the wires form a better connection when soldering together.

Düzenle

Adım 7

Solder your wires together by applying heat to the bottom of your wires and solder to the top. The solder will melt onto the copper strands solidifying both wires together.
Burn and fire hazard. Take appropriate precautions and solder in a well-ventilated area.
Pre-heat soldering iron to 325 Fahrenheit.

Düzenle

Adım 8

Use electrical tape to wrap the soldered wires.
This will prevent both wires from contacting each other.

Düzenle

Adım 9

Slide the heat shrink over the soldered wires.

Düzenle

Adım 10

Use your heat source to apply heat to the heat shrink.
Burn and fire hazard.
Apply heat from heat appliance half an inch away from heat shrink.

Düzenle

Adım 11

Connect your Christmas tree plug into the outlet.

Düzenle

Sonuç

You've completed soldering and properly covered any exposed wires being worked on. Connect your cable to an electrical outlet; you're Christmas tree is ready to light once again.