How to Repair a Ripped Face Mask Strap

Bryan Roman ve başka bir katkıda bulunan

En son July 19, 2023 tarihinde güncellendi

20 - 30 dakika

Orta

Giriş

1. adıma git

If your reusable face mask has a detached strap, use this guide to reattach the ripped strap.

The strap on reusable face masks is used to secure the mask onto your face, a ripped strap will cause the mask to not fully cover your mouth and nose. With the current health climate, it is important to ensure that face coverings are being used properly and effectively.

This guide includes the usage of hand sewing needles and scissors, which when handled incorrectly could cause injury to the user. There are also steps that include intricate hand work which may be difficult for those with hand joint issues.

Neye ihtiyacın var

Aletler

Daha fazlasını göster…

iFixit bu bağlantılar üzerinden satın aldığınızda komisyon kazanır.

Adım 1 How to Repair a Ripped Face Mask Strap

How to Repair a Ripped Face Mask Strap, How to Repair a Ripped Face Mask Strap: adım 1, 1 resimden 1.

Using a pair of scissors cut off any potential fraying on both the face mask and the detached strap.

Düzenle

Adım 2

Set the face mask on a flat surface.

Düzenle

Adım 3

Place the sewing thread through the hole of the hand sewing needle, this is called threading the needle.
Secure the far end of the sewing thread with a knot.

Düzenle

Adım 4

Run the needle through the strap and the corresponding place on the face mask.

Düzenle

Adım 5

Hand stitch the strap to the mask.
Repeat this until the strap is fully attached to the face mask.

Düzenle

Adım 6

To end the sewing process thread the needle under the nearest stitch and pull the needle through the loop that is formed, this should create a knot.
Do this twice to secure the stitches in place.

Düzenle