Ana içeriğe geç

Giriş

Garden hoses can become crushed or ripped through usage. This guide shows you how to choose the right replacement and change the broken end easily and cheaply.

  1. Measure the diameter of the inside of the original hose.
    • Measure the diameter of the inside of the original hose.

  2. Choose the right size of the hose end.
    • Choose the right size of the hose end.

    • Know the difference between the male and female ends (the featured end is female).

    • Hoses typically come in sizes 5/8", 3/4", and 1/2".

  3. Remove the original broken end by using a utility knife to cut 2-3 inches from the hose.
    • Remove the original broken end by using a utility knife to cut 2-3 inches from the hose.

    • Place the hose on a flat surface such as a workbench, and perform a smooth, straight cut.

  4. Remove the fitting.
    • Remove the fitting.

  5. Attach the new fitting. Slide the clamp onto the hose. Insert the new fitting.
    • Attach the new fitting.

    • Slide the clamp onto the hose.

    • Insert the new fitting.

    • Soak the hose in warm water or let it sit in the sun to make it more pliable.

  6. Tighten the clamp with a screwdriver.
    • Tighten the clamp with a screwdriver.

Sonuç

Test your new and improved hose by turning on the water and watching for leaks.

Bir başkası bu kılavuzu tamamladı.

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 Gün: 1

Son 30 Gün: 9

Her zaman: 341