Eşyalarını Tamir Et Topluluk Mağaza

How to Replace Scott Mountain Bike Handlebars

Giriş

Need to replace the handlebars on your mountain bike? This guide will show you how to replace it so the bike is good as new.

Neye ihtiyacın var

  1. How to Replace Scott Mountain Bike Handlebars, Scott Mountain Bike Handlebars: adım 1, 2 resimden 1. How to Replace Scott Mountain Bike Handlebars, Scott Mountain Bike Handlebars: adım 1, 2 resimden 2.

    • Prop bike upright

    • Unscrew the hex bolts holding the front and rear shifter in place.

    • Use the H4 size hex wrench

    • Repeat for other side of handlebars.

    Düzenle

  2. How to Replace Scott Mountain Bike Handlebars: adım 2, 1 resimden 1.

    • Slide the shifters toward the center of the handlebars so there is a gap between them and the grips.

    • Repeat for other side of handlebars.

    Düzenle

  3. How to Replace Scott Mountain Bike Handlebars: adım 3, 1 resimden 1.

    • Use a flathead screwdriver to wedge a gap between the grip and the handlebars.

    • Twist grip around until it comes off of handlebar.

    • Repeat for other side of handlebars.

    Düzenle

  5. How to Replace Scott Mountain Bike Handlebars: adım 4, 1 resimden 1.

    • Slide the shifters off of the end of the handlebars.

    • Let them hang on the bike.

    • Repeat for other side of handlebars.

    Düzenle

  6. How to Replace Scott Mountain Bike Handlebars: adım 5, 1 resimden 1.

    • Unscrew the hex bolts holding the center bracket in place.

    • Use H3 hex wrench.

    • Place center bracket and hex screws off to the side. They will be needed in the next step.

    Düzenle

  7. How to Replace Scott Mountain Bike Handlebars: adım 6, 1 resimden 1.

    • Attach new handlebars and screw the center bracket back in place.

    • Make sure that handlebars are centered.

    Düzenle

  8. How to Replace Scott Mountain Bike Handlebars: adım 7, 1 resimden 1.

    • Slide the shifters back onto the handlebars so that the numbers are upright.

    • Do not screw them back in place yet.

    Düzenle

  9. How to Replace Scott Mountain Bike Handlebars: adım 8, 1 resimden 1.

    • Slide the handlebar grips back onto the ends of the handlebars.

    • Slide the shifters back against the grips and screw them into place.

    Düzenle
Sonuç

By following these steps, you will have your bike ready in no time.

Yazar

4 tane daha katılımcı ile

Sean Slater

Üyelik tarihi: 02/24/15

139 İtibar

1 Kılavuz yazıldı

Rozetler: 3

Ekip

Cal Poly, Team 23-3, Green Winter 2015 Cal Poly, Team 23-3, Green Winter 2015 üyesi

CPSU-GREEN-W15S23G3

6 Üyeler

13 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 4

Son 30 gün: 13

Her zaman: 1,716