Eşyalarını Tamir Et Topluluk Mağaza

How to Replace a Penny Board Wheel

Giriş

The wheels on a Penny board are what makes the skateboard functionable. It is an essential part of the board. Usage wears the wheels and causes them to lose their grip, smoothness, and functionality. Products are usually expected to be replaced from being used for a long period of time or from just sitting with no usage. This guide will introduce simple steps to replace worn out wheels from a Penny board and will allow you to have a smooth ride. For this repair, a socket wrench with a 13mm hex socket nut is required.

Neye ihtiyacın var

  1. How to Replace a Penny Board Wheel, Wheel: adım 1, 1 resimden 1.

    • Use a 13 mm socket wrench to unscrew the axel nuts.

    Düzenle

  2. How to Replace a Penny Board Wheel: adım 2, 2 resimden 1. How to Replace a Penny Board Wheel: adım 2, 2 resimden 2.

    • Remove the axle nut and the washer from the axle.

    Düzenle

  3. How to Replace a Penny Board Wheel: adım 3, 1 resimden 1.

    • Remove the wheel.

    Düzenle

  5. How to Replace a Penny Board Wheel: adım 4, 1 resimden 1.

    • Put the new wheel on the axle.

    Düzenle

  6. How to Replace a Penny Board Wheel: adım 5, 1 resimden 1.

    • Replace washer on top of the axle.

    Düzenle

  7. How to Replace a Penny Board Wheel: adım 6, 1 resimden 1.

    • Place the axle nut on to the axle.

    Düzenle

  8. How to Replace a Penny Board Wheel: adım 7, 1 resimden 1.

    • Place the 13 mm socket wrench on top of the axle nut and tighten.

    Düzenle
Sonuç

To reassemble your worn out wheels, follow these instructions in reverse order.

Yazar

3 tane daha katılımcı ile

Ellie Walsh

Üyelik tarihi: 02/01/23

145 İtibar

1 Kılavuz yazıldı

Rozetler: 2

Ekip

UC Davis, Team 3-6, Andersen Winter 2023 UC Davis, Team 3-6, Andersen Winter 2023 üyesi

UCD-ANDERSEN-W23S3G6

3 Üyeler

1 Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 5

Son 30 gün: 13

Her zaman: 249