Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

Giriş

Rear light bulbs often go out on cars. The rear light bulbs are often hidden behind a rear tail light cover. This document provides guidance on how to remove the tail light cover and then provides guidance on how to remove and replace the associated rear tail light bulbs for 2011 to 2015 Ford Explorers.

  1. Lift and open the rear cargo door. Lift and open the rear cargo door.
    • Lift and open the rear cargo door.

  2. Locate the two plastic screw covers that are adjacent to the rear light covers.
    • Locate the two plastic screw covers that are adjacent to the rear light covers.

  3. Using a flathead screwdriver, pry out both plastic screw covers.
    • Using a flathead screwdriver, pry out both plastic screw covers.

  4. Once covers are removed, there will be an 8 mm hex head screw located beneath each cover.
    • Once covers are removed, there will be an 8 mm hex head screw located beneath each cover.

  5. SKIP THE UPGRADE

    Save by fixing with an all-in-one kit.

    Shop iPhone Fix Kits

    SKIP THE UPGRADE

    Save by fixing with an all-in-one kit.

    Shop iPhone Fix Kits
  6. Using an 8 mm Deep Socket Wrench, remove both of the 20 mm (length) hex-head screws.
    • Using an 8 mm Deep Socket Wrench, remove both of the 20 mm (length) hex-head screws.

  7. Gently pull the tail light cover from the car. You may have to gently play with the cover by moving it back and forth in order to pry it loose form the car.
    • Gently pull the tail light cover from the car.

    • You may have to gently play with the cover by moving it back and forth in order to pry it loose form the car.

  8. Once removed, the bulb sockets will be located on the inside portion of the tail light cover.
    • Once removed, the bulb sockets will be located on the inside portion of the tail light cover.

  9. Turn the bulb socket about one quarter turn in a counterclockwise direction.
    • Turn the bulb socket about one quarter turn in a counterclockwise direction.

    • After it is turned, gently pull and remove the bulb socket from the tail light cover.

  10. Gently remove the bulb from the bulb socket.
    • Gently remove the bulb from the bulb socket.

  11. Gently place the new bulb in the bulb socket.
    • Gently place the new bulb in the bulb socket.

Sonuç

To reassemble your device, follow these instructions in reverse order.

5 farklı kişi bu kılavuzu tamamladı.

Michael Lynch

Üyelik tarihi: 29-09-2015

236 İtibar

1 Kılavuz yazıldı

Takım

Cal Poly, Team 14-4, Green Fall 2015 Cal Poly, Team 14-4, Green Fall 2015 üyesi

CPSU-GREEN-F15S14G4

5 Üyeler

12 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 12

Son 30 gün: 129

Her zaman: 15,321