Eşyalarını Tamir Et Topluluk Mağaza

How to Replace the Strings on your Rogue RM-100A A-Style Mandolin

Giriş

Follow this guide if you need to replace the string of your Rogue RM-100A A-Style Mandolin. The Mandolin is a stringed instrument and occasionally the strings may wear out or snap. With this step-by-step guide, you will learn how to restring your instrument so you can continue playing your favorite music in no time!

Neye ihtiyacın var

  1. How to Replace the Strings on your Rogue RM-100A A-Style Mandolin, Strings: adım 1, 2 resimden 1. How to Replace the Strings on your Rogue RM-100A A-Style Mandolin, Strings: adım 1, 2 resimden 2.

    • Lay the Mandolin face up on a flat surface.

    • Start at the headstock of the Mandolin, and unwind the wire string by turning the tuning peg in a clockwise rotation until it becomes loose and easy to remove.

    Düzenle

  2. How to Replace the Strings on your Rogue RM-100A A-Style Mandolin: adım 2, 3 resimden 1. How to Replace the Strings on your Rogue RM-100A A-Style Mandolin: adım 2, 3 resimden 2. How to Replace the Strings on your Rogue RM-100A A-Style Mandolin: adım 2, 3 resimden 3.

    • At the tailpiece of the Mandolin, use both of your thumbs to apply pressure to push the tailpiece cover away from you.

    • The edge of the tailpiece is a bit sharp. If your fingers hurt, use a small towel or cloth to cushion your thumbs as you push.

    Düzenle

  3. How to Replace the Strings on your Rogue RM-100A A-Style Mandolin: adım 3, 2 resimden 1. How to Replace the Strings on your Rogue RM-100A A-Style Mandolin: adım 3, 2 resimden 2.

    • Remove the string you are replacing from the tailpiece.

    • The string should be easy to remove.

    Düzenle

  5. How to Replace the Strings on your Rogue RM-100A A-Style Mandolin: adım 4, 2 resimden 1. How to Replace the Strings on your Rogue RM-100A A-Style Mandolin: adım 4, 2 resimden 2.

    • Insert the new string loop onto the hook.

    • Pull the string up along the bridge onto the fretboard until it reaches the headstock.

    Düzenle

  6. How to Replace the Strings on your Rogue RM-100A A-Style Mandolin: adım 5, 2 resimden 1. How to Replace the Strings on your Rogue RM-100A A-Style Mandolin: adım 5, 2 resimden 2.

    • Insert the string into the hole of the tuning post all the way through.

    Düzenle

  7. How to Replace the Strings on your Rogue RM-100A A-Style Mandolin: adım 6, 3 resimden 1. How to Replace the Strings on your Rogue RM-100A A-Style Mandolin: adım 6, 3 resimden 2. How to Replace the Strings on your Rogue RM-100A A-Style Mandolin: adım 6, 3 resimden 3.

    • Loosen the hold of the string.

    • Turn the excess string to the left and pull it under the string.

    • Again, pull the excess string up and over to the left.

    • This creates a sort of hold/knot on the string.

    Düzenle

  8. How to Replace the Strings on your Rogue RM-100A A-Style Mandolin: adım 7, 3 resimden 1. How to Replace the Strings on your Rogue RM-100A A-Style Mandolin: adım 7, 3 resimden 2. How to Replace the Strings on your Rogue RM-100A A-Style Mandolin: adım 7, 3 resimden 3.

    • Pull the knot.

    • Twist the tuning pegs in a counterclockwise rotation.

    • Twist towards the tailpiece.

    Düzenle

  9. How to Replace the Strings on your Rogue RM-100A A-Style Mandolin: adım 8, 1 resimden 1.

    • Cut any excess string with pliers.

    Düzenle

  10. How to Replace the Strings on your Rogue RM-100A A-Style Mandolin: adım 9, 1 resimden 1.

    • Place the tailpiece back by sliding it towards the headstock.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 11

Son 30 gün: 33

Her zaman: 197