How to Resize a Metal Ring that is Too Large

Giriş

Do you have a metal ring that you love, but cannot wear? Is that metal ring too large to wear on your finger? Do you have insufficient funds to go to a professional jeweler? Do you have no experience with soldering?

This guide will show you how to safely resize a metal ring that is too large for your finger by creating a mold out of soft, polymer clay and then trimming the mold, so that it acts as an insert. While the guide suggests this is a two day process, it requires x hours for the clay to dry into a mold

For this repair, you will need soft, polymer clay, scissors, and super glue rather than heat-based repairs. Also, drying is required, which will

Warning: minimize contact with the super glue and your skin.

Neye ihtiyacın var

Adım 1 How to Resize a Metal Ring that is Too Large

How to Resize a Metal Ring that is Too Large, How to Resize a Metal Ring that is Too Large: adım 1, 2 resimden 1.

How to Resize a Metal Ring that is Too Large, How to Resize a Metal Ring that is Too Large: adım 1, 2 resimden 2.

Find the metal ring that is too large for your finger.

Düzenle

Adım 2

Tear off a quarter size of soft clay.
The soft clay will act as a mold that will enlarge the metal ring.

Düzenle

Adım 3

How to Resize a Metal Ring that is Too Large: adım 3, 3 resimden 3.

Wear the metal ring.
Place the back of your hand flat on a table.
Shape the soft clay snugly in the gap between the metal ring and your finger.

Düzenle

Adım 4

How to Resize a Metal Ring that is Too Large: adım 4, 3 resimden 3.

Remove your finger slowly from the molded soft clay, immediately after shaping the soft clay.
If the molded soft clay shifts then repeat Step 3.
Wait for the soft clay to dry overnight.
To tell if the soft clay is dry, touch the soft clay to see if it has hardened.

Düzenle

Adım 5

How to Resize a Metal Ring that is Too Large: adım 5, 3 resimden 3.

Remove the soft clay mold from the metal ring.

Düzenle

Adım 6

Use scissors to trim the mold's extra soft clay sticking out of the metal ring.

Düzenle

Adım 7

How to Resize a Metal Ring that is Too Large: adım 7, 3 resimden 3.

Limit super glue exposure from skin as it may cause a rash. If super glue comes into contact with skin, soak the skin in warm, soapy water.
Adhere super glue on the soft clay mold that will touch the metal ring.
Attach the soft clay mold to the metal ring before the super glue dries.

Düzenle

Adım 8

How to Resize a Metal Ring that is Too Large: adım 8, 3 resimden 3.

Wait 10 minutes for the super glue to dry.
Trim the soft clay with scissors again, if needed.
The goal of this step is to align the soft clay mold along the metal ring's band.