Ana içeriğe geç
  1. Plug in the soldering iron and let it reach optimum temperature.
    • Plug in the soldering iron and let it reach optimum temperature.

    • The soldering iron is very hot. Please do not touch the the tip of the iron when it is plugged in or until the iron cools.

    • Make sure it is plugged into a 150W outlet (common household wall outlet). Check the device for damages and impurities on the tip such as plastic or grease. Please make sure the iron is not in any contact with potentially flammable items and clean the tip if the soldering iron has been heavily used.

  2. Check that the connection between the wire and the device has good contact. Prior to beginning the soldering process make sure the the conjoining connections between the wire and the device are properly wound together.
    • Check that the connection between the wire and the device has good contact. Prior to beginning the soldering process make sure the the conjoining connections between the wire and the device are properly wound together.

  3. Apply solder agent to iron until the tip of the iron is coated in the metallic agent. This agent needs to be heated to just under 400 Celsius. Use precaution not to drop hot soldering on you.
    • Apply solder agent to iron until the tip of the iron is coated in the metallic agent. This agent needs to be heated to just under 400 Celsius. Use precaution not to drop hot soldering on you.

  4. Touch the soldering iron to the connection and evenly apply a layer of solder to connect and create a good a connection between the wire and the device.
    • Touch the soldering iron to the connection and evenly apply a layer of solder to connect and create a good a connection between the wire and the device.

  5. Finally wait until the solder cools before re-assembly. It should cool within seconds of application.
    • Finally wait until the solder cools before re-assembly. It should cool within seconds of application.

Sonuç

To reassemble your device, follow these instructions in reverse order.

4 farklı kişi bu kılavuzu tamamladı.

Paul Haas

Üyelik tarihi: 13-01-2015

754 İtibar

2 adet Kılavuz yazıldı

Takım

USF Tampa, Team 3-2, Hickman Winter 2015 USF Tampa, Team 3-2, Hickman Winter 2015 üyesi

USFT-HICKMAN-W15S3G2

4 Üyeler

6 adet Kılavuz yazıldı

Bir Yorum

As a developer with Google's platform to enhance the Google Assistant A.I. with better commands, your website recognized my online profile and asked if I would provide better pictures for just soldering process and I would be honored as I'm currently performing this repair now, stay tuned!

Jamie J. - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 4

Son 30 gün: 16

Her zaman: 4,759