Ana içeriğe geç

Parçalar

Hiçbir parça belirtilmedi.

  1. Use a Phillips #2 screwdriver to remove the two screws on the top of the device toward the back.
    • Use a Phillips #2 screwdriver to remove the two screws on the top of the device toward the back.

  2. Remove the plastic cover by lifting up the back and pulling it away from the faceplate.
    • Remove the plastic cover by lifting up the back and pulling it away from the faceplate.

  3. Unclip the three latches on the bottom of the device.
    • Unclip the three latches on the bottom of the device.

  4. Pull the faceplate off.
    • Pull the faceplate off.

  5. Now that the device is open, you can check for any blown fuses that may need to be replaced.
    • Now that the device is open, you can check for any blown fuses that may need to be replaced.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Taryn

Üyelik tarihi: 15-09-2011

103 İtibar

4 adet Kılavuz yazıldı

Takım

University of Maine, Team 1-2, Diaz Fall 2011 University of Maine, Team 1-2, Diaz Fall 2011 üyesi

UMAINE-DIAZ-F11S1G2

2 Üyeler

5 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 907