Giriş

Has debris found its way between the casing and the screen? Use this guide to remove and clean the screen.

As handling the display housing may damage the wire strip, use caution.

Parçalar

Hiçbir parçaya gerek yok.

On the door's bottom edge, locate the gap between the external and internal screen covers.
  • On the door's bottom edge, locate the gap between the external and internal screen covers.

  • Using a spudger (not shown), gently pry apart the external and internal covers until the sides start to separate.

  • Continue working your way along the edges of the phone, alternating sides, until the external cover can be easily removed.

Yorum Ekle

On the display housing, locate and unscrew the four corner T6 Torx screws connecting the housing and the internal cover.
  • On the display housing, locate and unscrew the four corner T6 Torx screws connecting the housing and the internal cover.

Yorum Ekle

  • The fragile wire strip connecting the display housing to the circuit board is located on the left side of the inner hinge.

  • Locate the gap between the display housing and internal cover, in the same manner you would flip open the phone, use your finger (not shown) to lift the housing from the cover and set it down.

Yorum Ekle

  • Using a lens cloth, wipe away any dust or debris from the display or screens.

Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

Amy

Üyelik tarihi: 15-10-2012

1 İtibar

4 adet Kılavuz yazıldı

Takım

University of Maine, Team 1-4, Diaz Fall 2012 University of Maine, Team 1-4, Diaz Fall 2012 üyesi

UMAINE-DIAZ-F12S1G4

5 Üyeler

6 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 0

Her zaman: 209