Giriş

This guide will explain how to do simple maintenance on your Avanti 308YWT evaporator tray. This involves simply removing and cleaning the tray. If the evaporator tray is not cleaned it could cause the fridge to start leaking, which could eventually damage the floor.

Before starting, unplug the refrigerator.
  • Before starting, unplug the refrigerator.

Yorum Ekle

Go to the bottom of the back side of the refrigerator and locate the cut out where the compressor and evaporator are stored.
  • Go to the bottom of the back side of the refrigerator and locate the cut out where the compressor and evaporator are stored.

Yorum Ekle

Remove the evaporator tray by simply pulling up and out the tray. make sure that none of the liquid spills.
  • Remove the evaporator tray by simply pulling up and out the tray. make sure that none of the liquid spills.

Yorum Ekle

The evaporator tray might have ice build up on it. You can remove this ice by pouring warm water on the tray. After the ice is melted, clean the tray with warm water and soap. The evaporator tray might have ice build up on it. You can remove this ice by pouring warm water on the tray. After the ice is melted, clean the tray with warm water and soap.
  • The evaporator tray might have ice build up on it. You can remove this ice by pouring warm water on the tray. After the ice is melted, clean the tray with warm water and soap.

Yorum Ekle

Dry and reinsert the tray.
  • Dry and reinsert the tray.

Yorum Ekle

Plug the refrigerator back in.
  • Plug the refrigerator back in.

Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

6 başka kişi bu kılavuzu tamamladı.

Seye

Üyelik tarihi: 11-10-2014

326 İtibar

1 Kılavuz yazıldı

Takım

USF Tampa, Team 1-38, Donnelly Fall 2014 USF Tampa, Team 1-38, Donnelly Fall 2014 üyesi

USFT-DONNELLY-F14S1G38

1 Üye

1 Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 14

Tüm Zamanlar: 814