Giriş

If you have print quality problems, clean the corona wire.

Aletler

Hiçbir alete gerek yok.

Parçalar

Hiçbir parçaya gerek yok.

  1. Press the front cover release button.
    • Press the front cover release button.

    • Keep the button pressed and pull the cover toward yourself.

    Yorum Ekle

  2. With the front cover in the downward position, the drum & toner unit will be visible.
    • With the front cover in the downward position, the drum & toner unit will be visible.

    • Grab the black-and-yellow handle on the unit. Lift unit up and pull it out of the printer.

    Yorum Ekle

    • Clean the corona wire inside the drum unit by gently sliding the blue tab all the way to left and then back to the far right. Repeat several times.

    • Make sure the arrow on the tab lines up with the arrow on the drum unit before you place it back into the printer. If the tab is in the wrong place, a vertical line might appear on future print jobs.

    Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

2 başka kişi bu kılavuzu tamamladı.

Nathan Ruiz

Üyelik tarihi: 14-01-2010

159 İtibar

2 adet Kılavuz yazıldı

Takım

Cal Poly, Team 4-14, Forte Winter 2010 Cal Poly, Team 4-14, Forte Winter 2010 üyesi

CPSU-FORTE-W10S4G14

5 Üyeler

5 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 7

Son 30 Gün: 33

Her zaman: 11,709