Ana içeriğe geç

Parçalar

  1. Use a Phillips #2 screwdriver to remove the two screws on the top of the device toward the back.
    • Use a Phillips #2 screwdriver to remove the two screws on the top of the device toward the back.

  2. Remove the plastic cover by lifting up the back and pulling it away from the faceplate.
    • Remove the plastic cover by lifting up the back and pulling it away from the faceplate.

  3. Unclip the three latches on the bottom of the device.
    • Unclip the three latches on the bottom of the device.

  4. Pull the faceplate off.
    • Pull the faceplate off.

  5. Locate the optic lens in the middle of the disc drive. Dip a cotton swab in rubbing alcohol and use it to lightly wipe the lens. After the lens is clear of dust and debris, wait a few minutes to let it air dry. Locate the optic lens in the middle of the disc drive. Dip a cotton swab in rubbing alcohol and use it to lightly wipe the lens. After the lens is clear of dust and debris, wait a few minutes to let it air dry. Locate the optic lens in the middle of the disc drive. Dip a cotton swab in rubbing alcohol and use it to lightly wipe the lens. After the lens is clear of dust and debris, wait a few minutes to let it air dry.
    • Locate the optic lens in the middle of the disc drive. Dip a cotton swab in rubbing alcohol and use it to lightly wipe the lens. After the lens is clear of dust and debris, wait a few minutes to let it air dry.

Bitiş Çizgisi

2 farklı kişi bu kılavuzu tamamladı.

Brian

Üyelik tarihi: 08-09-2011

112 İtibar

1 Kılavuz yazıldı

Takım

University of Maine, Team 1-2, Diaz Fall 2011 University of Maine, Team 1-2, Diaz Fall 2011 üyesi

UMAINE-DIAZ-F11S1G2

2 Üyeler

5 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 7

Her zaman: 2,131