Giriş
Before starting this guide there are some things you should be aware of; First make sure your vehicle is parked on a level surface with the parking brake on. This is needed for one step so you can safely put the vehicle in 1st gear so the shifter is out of the way. For this tutorial the only tools needed are 1/4" ratchet, 16mm wrench, and 7 mm wrench .
Neye ihtiyacın var
-
-
Locate the hood latch in your vehicle found on the drivers side under the dashboard to the left of the parking brake pedal.
-
Pull the latch to release hood.
-
-
-
-
Place the head unit face down to allow the wires on the back to be visible and more easily accessible.
-
Listed below are the wires coming connected to the head unit. The colors correspond to the same color of the wire.
-
RCA inputs
-
Microphone input/wire
-
Power/audio/assorted control wire harness
-
Antenna input/wire
-
Harness disconnect
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
İptal et: Bu kılavuzu tamamlamadım.
8 farklı kişi bu kılavuzu tamamladı.