Skip to main content

Giriş

The filter on the Dyson DC14 vacuum needs to be cleaned every six months in order to maintain its peak operating condition.

Aletler

Hiçbir alet belirtilmedi.

Parçalar

  1. The filter is located in the canister of your vacuum.
    • The filter is located in the canister of your vacuum.

  2. Android Tamir Setleri

    Yeni bir ekran veya pil, bir tamir kiti kadar yakınında.

    Hemen Alışveriş Yapın

    Android Tamir Setleri

    Yeni bir ekran veya pil, bir tamir kiti kadar yakınında.

    Hemen Alışveriş Yapın
  3. Open the canister filter compartment.  Push the clip upwards, and open the canister top away from you. Remove the yellow filter housing. Remove the yellow filter housing.
    • Open the canister filter compartment. Push the clip upwards, and open the canister top away from you.

    • Remove the yellow filter housing.

  4. Remove the blue sponge-filter from the yellow filter housing.
    • Remove the blue sponge-filter from the yellow filter housing.

    • The filter and housing must both be completely dry before reinstalling. Do not use your vacuum without filters installed.

    • Clean the blue sponge-filter in cold water until the water runs clear.

Sonuç

Once the filter is cleaned, set the blue filter sponge and the yellow filter housing aside for at least 24 hours to dry. Do not use your vacuum without a filter, or when the filter is still wet. To reassemble, follow the steps in reverse order.

11 farklı kişi bu kılavuzu tamamladı.

Donald Percivalle

Üyelik tarihi: 03-10-2012

1.523 Reputation

4 adet Kılavuz yazıldı

Team

Cal Poly, Team 3-22, Amido Fall 2012 Cal Poly, Team 3-22, Amido Fall 2012 üyesi

CPSU-AMIDO-F12S3G22

4 Üyeler

7 adet Kılavuz yazıldı

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 16

Past 7 Days: 114

Past 30 Days: 412

All Time: 28,200