Ana içeriğe geç

Giriş

A backpack often has to take a lot when you are on the road. Due to frequent use, the conector may break and need to be replaced. Here we show you how to replace a broken conector with a new one and how to get your backpack ready for use again!

Aletler

Hiçbir alet belirtilmedi.

Parçalar

  1. Please note: For better visibility in these instructions, we used an Aeroflex frame detached from the backpack. You don’t have to remove the frame of your backpack first! Please note: For better visibility in these instructions, we used an Aeroflex frame detached from the backpack. You don’t have to remove the frame of your backpack first! Please note: For better visibility in these instructions, we used an Aeroflex frame detached from the backpack. You don’t have to remove the frame of your backpack first!
    • Please note: For better visibility in these instructions, we used an Aeroflex frame detached from the backpack. You don’t have to remove the frame of your backpack first!

  2. First press the frame into one side of the conector. Note: The wire frame must be on top of the conector.
    • First press the frame into one side of the conector. Note: The wire frame must be on top of the conector.

    • Important: It must click!

  3. Then press the wire frame into the other side. Important: It must click! Important: It must click!
    • Then press the wire frame into the other side.

    • Important: It must click!

Sonuç

Finished! You did it.

Bu çevirmenlere özel teşekkürler:

de en

75%

Daniel Schmid dünyayı onarmamıza yardım ediyor! Katkıda bulunmak ister misiniz?
Çeviriye Başlayın ›

Daniel Schmid

Üyelik tarihi: 22-02-2016

297 İtibar

13 adet Kılavuz yazıldı

Takım

Vaudesport Vaudesport üyesi

Community

3 Üyeler

91 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 3

Son 30 gün: 6

Her zaman: 67