Ana içeriğe geç
Onarım Topluluğuna Katılın - Hesap Oluşturun

How to start a new guide

    1. How to start a new guide, Get into the guide maker: adım 1, 1 resimden 1.
      • Click Fix Your Stuff, then click Repair guides. You should see this screen. Then Click Create a Guide.

      FixBot'a Sor

      Yorum Ekle

    2. How to start a new guide, Setup Part 1: adım 2, 1 resimden 1.
      • 2: Add your device in Device, on "What part are you replacing", type what you are replacing. and type a title. If you click Show More, you can type an introduction.

      FixBot'a Sor

      Yorum Ekle

    3. How to start a new guide, Setup Part 2: adım 3, 1 resimden 1.
      • Fill out the remaining setup, these are not necesarry but these help you be more specific:

      • Time Estimate: You can set the amount of time required to fix this product

      • Difficulty estimate: The difficulty estimate shown is Moderate, which is the default estimate. Can be configured to set a difficulty.

      • Prerequisite guides: Sometimes devices have hidden "prerequisite-only" guides that can be placed into your guide to avoid writing tons of steps. Also, you can use the the back cover/screen replacement guides as a starting Prerequisite. All prerequisites have to be in order.

      • Tools and Parts: You can add tools and/or parts to your guide.

      • Conclusion: Give the reader after-repair instructions.

      FixBot'a Sor

      Yorum Ekle

Sonuç

Your'e all done setting up your guide! You can start posting steps.

İptal et: Bu kılavuzu tamamlamadım.

Bir başkası bu kılavuzu tamamladı.

redratchet21

Üyelik tarihi: 01/29/26

2.874 İtibar

11 adet Kılavuz yazıldı

0Kılavuz Yorumları

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 5

Son 30 gün: 38

Her zaman: 109