Eşyalarını Tamir Et Topluluk Mağaza

Huawei MediaPad M3 Charging Port Replacement

Giriş

The Charging Port on the Huawei MediaPad M3 can go defunct and cause issues when trying to keep or fully charge the device. This guide will serve to show how to replace the charging port in the quickest and most efficient way.

Neye ihtiyacın var

  1. Huawei MediaPad M3 Charging Port Replacement, Charging Port: adım 1, 1 resimden 1.

    • Using the TE-03 Metal Wedge Tool, remove the display by gently sliding it under the edge of the display.

    Düzenle

  2. Huawei MediaPad M3 Charging Port Replacement: adım 2, 1 resimden 1.

    • Use a Phillips #00 screwdriver to remove three 3.0mm screws from the metal casing on the charging port.

    Düzenle

  4. Huawei MediaPad M3 Charging Port Replacement: adım 3, 1 resimden 1.

    • Using the Phillips #00 screwdriver, remove the eight screws.

    Düzenle

  5. Huawei MediaPad M3 Charging Port Replacement: adım 4, 1 resimden 1.
    Bu adımda kullanılan alet:
    Tweezers
    $4.99
    Satın Al

    • Using the tweezers, remove the ribbon cable from the charging port.

    Düzenle

  6. Huawei MediaPad M3 Charging Port Replacement: adım 5, 1 resimden 1.

    • Using the tweezers, remove the black piece attached to the green charging port.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 3

Son 7 gün: 7

Son 30 gün: 18

Her zaman: 1,975