Ana içeriğe geç

Giriş

Follow the guide to replace touchscreen glass

  1. Open the SD slot and remove the screw hidden under the sticker.
    • Open the SD slot and remove the screw hidden under the sticker.

  2. Use an opening pick to disengage the clips securing the back cover. Use an opening pick to disengage the clips securing the back cover. Use an opening pick to disengage the clips securing the back cover.
    • Use an opening pick to disengage the clips securing the back cover.

  3. Carefully swing up the display assembly, still connected by the touchscreen and display ribbon cables. Disconnect the touchscreen connector. Disconnect the display connector.
    • Carefully swing up the display assembly, still connected by the touchscreen and display ribbon cables.

    • Disconnect the touchscreen connector.

    • Disconnect the display connector.

  4. Remove the 6 screws that secure the 2 metal stripes holding the display. Remove the display. Remove the display.
    • Remove the 6 screws that secure the 2 metal stripes holding the display.

    • Remove the display.

  5. Apply heat on the panel edges. Use an opening pick to separate the glass panel from the plastic frame. Apply heat on the panel edges. Use an opening pick to separate the glass panel from the plastic frame. Apply heat on the panel edges. Use an opening pick to separate the glass panel from the plastic frame.
    • Apply heat on the panel edges. Use an opening pick to separate the glass panel from the plastic frame.

  6. Remove any remaining adhesive and piece of glass to allow adhesive and glass panel replacement. Remove any remaining adhesive and piece of glass to allow adhesive and glass panel replacement.
    • Remove any remaining adhesive and piece of glass to allow adhesive and glass panel replacement.

Sonuç

To assemble the device, follow these instructions in reverse order.

17 farklı kişi bu kılavuzu tamamladı.

Bu çevirmenlere özel teşekkürler:

100%

Bu çevirmenler dünyayı onarmamıza yardım ediyor! Katkıda bulunmak ister misiniz?
Çeviriye Başlayın ›

Smilzo

Üyelik tarihi: 09-11-2013

5.649 İtibar

34 adet Kılavuz yazıldı

4 Yorum

Not very clear unlike other guides I have followed….

Tracey Homeward - Yanıt

Ottimo video,

ti chiedo un consiglio, stavo cambiando il display al mio Huawei T1 A21 quando il connettore sul circuito stampato che collega il touch-screen si è danneggiato.

E’ un connettore particolare 25 pin + 28 e non riesco a trovarlo, sai dirmi come reperirlo?

grazie

Antonio

Antonio Durighello - Yanıt

Ciao,non saprei dirti dove trovarlo, io farei delle

ricerche online.

Nel caso che lo trovi è comunque un’intervento abbastanza complesso di saldatura ma visto che comunque è rotto tentare non nuoce.

attrezzati bene.

buona fortuna

Smilzo - Yanıt

Ciao,non saprei dirti dove trovarlo, io farei delle

ricerche online.

Nel caso che lo trovi è comunque un’intervento abbastanza complesso di saldatura ma visto che comunque è rotto tentare non nuoce.

attrezzati bene.

buona fortuna

Smilzo - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 8

Son 7 Gün: 40

Son 30 Gün: 168

Her zaman: 13,993