Ana içeriğe geç

Huawei P10 Back Cover Replacement

Neye ihtiyacın var

  1. Huawei P10 Back Cover Replacement, Back Cover: adım 1, 3 resimden 1. Huawei P10 Back Cover Replacement, Back Cover: adım 1, 3 resimden 2. Huawei P10 Back Cover Replacement, Back Cover: adım 1, 3 resimden 3.
    • Switch off your phone.

    • Remove the two Pentalobe P2 screws at the bottom.

    • Remove the SIM card tray.

  2. Huawei P10 Back Cover Replacement: adım 2, 3 resimden 1. Huawei P10 Back Cover Replacement: adım 2, 3 resimden 2. Huawei P10 Back Cover Replacement: adım 2, 3 resimden 3.
    • Insert a plastic opening tool between the display and the case starting at the bottom area of your phone.

    • Carefully pry the display with its parts out of the case.

    • Getting the prying tool in will require some effort, be careful not to slide the tool too much or you might slightly damage the housing.

    • After you pried out the bottom end, use the opening tool to open the clamps on both sides.

  3. Huawei P10 Back Cover Replacement: adım 3, 2 resimden 1. Huawei P10 Back Cover Replacement: adım 3, 2 resimden 2.
    • Don't open the phone all the way, yet. The cable for the standby and volume buttons is still connected to the back cover.

    • Swing open the phone backwards.

    • Use a spudger to disconnect the power- and volume button flex cable.

Sonuç

To reassemble your device, follow these instructions in reverse order.

6 farklı kişi bu kılavuzu tamamladı.

Dominik Schnabelrauch

Üyelik tarihi: 11/23/16

201.129 İtibar

682 adet Kılavuz yazıldı

Ekip

iFixit iFixit üyesi

Staff

136 Üyeler

16.579 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 8

Son 30 gün: 38

Her zaman: 7,737