Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Parçalar ve Aletler

Giriş

This guide will help you replace the motherboard inside your Huawei P8 Lite.

  1. Use an Opening Tool and start to lever up the back cover of your Huawei P8 Lite at the bottom of your phone. Use an Opening Tool and start to lever up the back cover of your Huawei P8 Lite at the bottom of your phone.
    • Use an Opening Tool and start to lever up the back cover of your Huawei P8 Lite at the bottom of your phone.

  2. There are clips around the whole mid frame, holding down the back cover. Open all of them with the Opening Tool. When all clips are open, remove the back cover from the rest of the phone. If the back cover doesn't come freely, there are probably some additional clips that need to be disconnected.
    • There are clips around the whole mid frame, holding down the back cover. Open all of them with the Opening Tool.

    • When all clips are open, remove the back cover from the rest of the phone.

    • If the back cover doesn't come freely, there are probably some additional clips that need to be disconnected.

  3. Use a tweezer to remove the warranty sticker which sits on a screw in the bottom right of your phone.
    • Use a tweezer to remove the warranty sticker which sits on a screw in the bottom right of your phone.

  4. Nintendo Switch Kit'leri

    Oyuna geri dönmek için hızlı bir düzeltme

    Switch Kit'leri Satın Al

    Nintendo Switch Kit'leri

    Oyuna geri dönmek için hızlı bir düzeltme

    Switch Kit'leri Satın Al
  5. Remove the 4 black Torx T5 screws which hold down the lower part of the loudspeaker.
    • Remove the 4 black Torx T5 screws which hold down the lower part of the loudspeaker.

    • Remove the three silver Phillips #00 screws which hold down the upper part of the loudspeaker.

  6. Remove the loudspeaker carefully.
    • Remove the loudspeaker carefully.

  7. Continue by removing the SIM and SD card trays on the side of the device.
    • Continue by removing the SIM and SD card trays on the side of the device.

  8. Remove the two Torx T5 screws. One may be cover with a liquid indicator. Remove the five Phillips #000 screws. Take away both securing brackets covering the motherboard.
    • Remove the two Torx T5 screws. One may be cover with a liquid indicator.

    • Remove the five Phillips #000 screws.

    • Take away both securing brackets covering the motherboard.

    • If your phone has an NFC antenna, taking away the cover will automatically free its flex connector from the motherboard.

  9. Remove the three Phillips #000 screws on the silver panel.
    • Remove the three Phillips #000 screws on the silver panel.

  10. Carefully separate the four connectors holding the motherboard in place. Remove the motherboard from the device.
    • Carefully separate the four connectors holding the motherboard in place.

    • Remove the motherboard from the device.

Sonuç

To reassemble your device, follow these instructions in reverse order.

6 farklı kişi bu kılavuzu tamamladı.

John Poffenberger

Üyelik tarihi: 16-02-2017

353 İtibar

3 adet Kılavuz yazıldı

Takım

USF Tampa, Team 1-1, Kass Spring 2017 USF Tampa, Team 1-1, Kass Spring 2017 üyesi

USFT-KASS-S17S1G1

5 Üyeler

5 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 2,084